Cutting straight lines is easy when you
have a rotary trimmer. If you're in need of one, you should take a look
at the Fellowes Neutron. Here is what you need to know about it to decide
if it's what you need.
Cutting straight lines is easy when you
have a rotary trimmer. If you're in need of one, you should take a look
at the Fellowes Neutron. Here's what you need to know about it to decide
if it's what you need.
This is a good device to use if you need to trim
letter-sized documents that measure 8.5” x 11”. The Neutron has a
12-inch cutting length so it's perfect for the most common size of
documents, as well as smaller ones. It can even trim photographs.
The
cutting capacity of this device isn't on par with a guillotine or stack
cutter, but for a rotary trimmer, it's pretty good. It can cut up to 10
sheets of 20 lb bond paper at once, which should be good enough for
occasional use.
This device is safe to use because it
utilizes Fellowes' SafeCut blade cartridges. These cartridges enclose
the blade in plastic casing so that you'll be able to cut the paper and
not your fingers. The blades are very easy to change and swapping them
out only takes a few seconds so you'll be able to save some time. You
can even store an extra SafeCut blade in the base of the trimmer for
easy access.
To keep your documents in place as you cut, the
Neutron has an integrated paper clamp. You can move the clamp around so
that it will work with the size of your items.
This trimmer's
based has a number of cutting guides printed on it so you'll be able to
trim just the right amount of off of your paper. It even has a
protractor printed on it which can help make angled cuts a little bit
easier to accomplish.
The Neutron will take up some room on
your work surface but unless your desk is very small, it should take up
the entire thing. This trimmer has dimensions of approximately 3”
(height) x 8.5” (width) x 19” (length). It would be possible to
transport this device easily because it weighs less than 3 pounds.
Fellowes
is a great name to look for when purchasing office devices, especially
when it comes to rotary trimmers like the Neutron. This device is built
very well and it comes with a 10-year warranty, so you'll be able to get
a lot of use out and get it repaired or replacement if the needs
arises. Plus, this trimmer is very affordable. It will cost you less
than $50.00.
Recommendation:
Overall, the Fellowes Neutron is a great rotary paper trimmer for
occasional use and the trimming of letter-sized documents. It would be
good for home and office use, but you'll need to make sure the cutting
length and capacity works for you. Ten sheets is a good amount for this
type of device, but it won't cut it (no pun intended) if you need to
process a lot of paper quickly or if you work with large items. However,
if these limitations are fine with you, this trimmer might be a good
fit, so take a look at it today.
If you'd like to purchase the Fellowes Neutron, you should really visit MyBinding.com. They have this product available at a great price and they also have a wide selection of other Paper Handling products. Plus, you'll get free shipping on all orders over $75.00.
