Cold process laminators really give you an
edge when finishing your documents. Not only will lamination protect
your work from becoming damaged, it will make it look much more
professional. One of these is the Xyron 2500 Professional
Laminator, a device that requires no electricity and is simple to
operate. Here are the four things you should know about this wonderful
device.
Cold process laminators really give you an
edge when finishing your documents. Not only will lamination protect
your work from becoming damaged, it will make it look much more
professional. Xyron, an Arizona-based laminator manufacturer makes some
great machines that will make your documents and other projects look
the best they can. One of these is the Xyron 2500 Professional
Laminator, a device that requires no electricity and is simple to
operate. Here are the four things you should know about this wonderful
device.
It has a wide feed opening. The 2500 has a
large throat that can accept items that are 25 inches wide or less.
This is a great machine to use if you're working on a poster, sign, or
other fairly large object. (If you need to work with bigger documents,
Xyron's 4400 Professional Laminator can process documents over 40
inches wide.)
Things will get sticky - in a good way.
Xyron laminators are unique because not only do they do cold process
lamination, they can be used for making things sticky. By using an
adhesive cartridge with the 2500, you can put adhesive on the back (or
front) of your document so you can create beautiful presentations and
professional-looking mock-ups. One of the roll types even enables you
to create items that are sticky on one side and laminated on the other,
so you get the best of both words. Also, adhesives are available in the
following types: repositionable, permanent, and high-tack, which
provides the strongest bond. The rolls don't take long to change and
changing them is pretty easy, as well.
No warm-up, no mess. The
2500 is a manual machine and doesn't need to be powered by electricity
to work. This means you don't have to waste time waiting for your
machine to heat up and you won't need to deal with expensive problems,
such as an overheated motor. Each machine has heavy-duty rollers that
will apply adhesive from one end of your document to the other,
resulting in a perfect application - and no mess to clean up. Plus,
each adhesive is acid-free and lacks the overpowering smell of some
other bonding agents, such as spray adhesive.
Operation is a no-brainer.
One of the best things about the 2500 is that it's very easy to
operate. All you need to do to process your document is make sure the
right cartridge is installed, put your document in the machine's mouth,
and then slowly crank the handle. Within seconds, your item will be
beautifully laminated. (Or perfectly sticky, as the case may be.) If
you've just laminated something, you can use the 2500's built-in cutter
to get rid of the excess film. And there you go - you're done!
Clearly,
the Xyron 2500 Professional Laminator offer several great document
finishing functions. By using this machine, you will be able to produce
some of your best-looking work ever. That way, you will definitely have
both the upper hand and a nice batch of professional-looking work.
