Help! My Fellowes Paper Shredder Won't Shut Off!
So, you're having a weird problem with your paper shredder. Namely, your machine has an automatic stop/start feature and after you shred something, the unit won't shut off.Should you return the shredder? Is there something really wrong with it?
Relax. In most instances, a shredder that continuously runs isn't broken, it merely needs some basic maintenance. Most shredders, including models from Fellowes, GBC, MBM, Martin Yale, HSM and Dahle contain two tiny electronic sensors near the paper entry area. These sensors are designed to shoot signals back and forth enabling the shredder to turn itself on when paper enters the machine. After the paper has made it through the entry slot, the sensors then tell the machine to shut off.
It sounds like a simple enough process, but sometimes these sensors can malfunction or become blocked. This can happen when oil, paper dust, or debris covers the sensors. Covered-up sensors essentially tell the shredder that paper has entered it, thus causing it to continuously run. While this problem can occur in both cross- and strip-cut shredding machines, it tends to happen more often in cross-cut units because those units are oiled more frequently and create more paper dust than strip cut units.
This is a simple problem with an equally simple solution: wipe the debris or gunk off the sensors. That will make your machine as good as new. Here's how to do it:
Most of the time, these simple steps will solve the problem. You can do them as part of regular maintenance to keep your machine in good working order.
If your machine is a model that lacks the electronic sensors - such as a smaller deskside shredder designed for home use - you can still fix the problem on your own because those machines have mechanical sensors. These are also located in the middle of the paper entry and they look like small plastic dividers. (In most of these models, the sensors are white, but they could also be gray or black.) The sensors are depressed when paper enters the machine, which causes it to start shredding. Once the paper is gone, the machine stops.
Remove any debris. Use tweezers or pliers, if necessary, but be careful to not press down too hard on the sensors to avoid damaging them.
That's all there is to it! Hopefully this article has helped you understand why your paper shredder won't turn itself off. If these tips don't solve your problem, consult your instruction manual or the manufacturer for additional help.
Source: Free Articles from ArticlesFactory.com
ABOUT THE AUTHOR
If you try all of these things and your shredder is still broken, it might be time to consider buying a new machine. If you are looking for a good quality paper shredder for your office, you might want to check out MyBinding.com. They carry the full line of Fellowes Paper Shredders as well as shredders from GBC Shredmaster, Martin Yale, Intimus, MBM DestroyIt, Dahle and HSM of America. Choose from a huge selection of cross-cut and strip-cut paper shredders all at great prices and with free shipping.