Free Articles, Free Web Content, Reprint Articles
Monday, June 24, 2019
 
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles
 

How to Bind Documents With the GBC CombBind C55 Comb Binding Machine

Plastic comb binding is one of the oldest document finishing methods and it's one of the most popular. It is a great method to use when you need to bind documents for a meeting, class, and so on. The GBC CombBind C55 is a comb binding machine that can help you prepare your work. If you have it, here is a walk-through on how to use this comb binding machine:

Plastic comb binding is one of the oldest document finishing methods and it's one of the most popular. It's a great method to use when you need to bind documents for a meeting, class, and so on. The GBC CombBind C55 is a comb binding machine that can help you prepare your work. If you have it, here is a walk-through on how to use this comb binding machine:

  • First of all, make sure the C55 is placed on a sturdy, flat surface. You should make sure you have ample room for the machine and your supplies.

  • The C55 can punch up to 5 sheets at a time. It works with letter- and A4-sized paper and oversized covers. There is a switch on the left side of the machine you can adjust depending on what kind of materials you need to punch. For example, if you're using letter-sized paper, select the letter-sized setting. You might want to punch a few practice sheets to ensure you selected the right setting and to make sure you're lining the sheets up properly beforehand.

  • Place up to 5 sheets in the punching throat and lower the lever on the right side of the device. Remove your paper and punch more sheets if necessary.

  • Now you need to select a comb with which to bind your documents. The C55 will work with combs that are up to 1/2" in diameter, so your work can contain up to 90 pages. Here's a handy chart to help you determine which comb to use:

        Document length:                                                 Suggested comb diameter:

        10 to 25 pages                                                                                1/4"

        20 to 40 pages                                                                                5/16"

        30 to 55 pages                                                                                3/8"

        50 to 85 pages                                                                                1/2"

  • Once you select your comb, place it on the C55's comb opener. The teeth need to be facing up. Open the comb by rotating the dial to the left of the comb opener. Don't open the comb too far as this can cause the comb to go flying and then you'll have to go after it.

  • Start sliding the comb's teeth through the holes in your document. Don't forget to include the covers!

  • Close the comb and take your document off the C55. If you need to prepare any more documents, go ahead and punch and bind them. When you're done, empty the machine's chip tray. You should open up the machine over a garbage can so you don't get paper bits all over the place.

  • Finally, you should know that the C55 is meant for low-volume punching and binding. This is because the machine has a lot of plastic parts and it simply cannot withstand heavy-duty use. You should treat the device with care so you can get the most use out of it.

Those are the steps you need to take to take in order to successfully use the GBC CombBind C55. If you run into any problems during punching and/or bindingFree Web Content, take a few minutes and go through the machine's instruction manual to see if there are any pointers. Hopefully you won't have any problems and you'll be able to prepare your documents without any trouble. Good luck and happy binding!

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR


Jeff McRitchie is the Vice-President of Marketing for MyBinding.com. He regularly writes articles, reviews, and blog posts on topics related to bookbinding, laminating, paper shredding, and office equipment. More than 2,500 of his reviews have been published in thousands of locations on the Internet. If you're looking for information about comb binding machines, his articles are a great place to start.



Health
Business
Finance
Travel
Technology
Home Repair
Computers
Marketing
Autos
Family
Entertainment
Law
Education
Communication
Other
Sports
ECommerce
Home Business
Self Help
Internet
Partners


Page loaded in 0.034 seconds