Free Articles, Free Web Content, Reprint Articles
Sunday, August 25, 2019
 
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles
 

How to Spiral Bind a Book

There are many different binding methods available and one of the most popular is spiral binding. Spiral binding is also known as coil binding because it involves using coils to bind your work. This type of binding is perfect for work containing up to 440 pages, plus it's not too difficult. Here is how to spiral bind a book:

There are many different binding methods available and one of the most popular is spiral binding. Spiral binding is also known as coil binding because it involves using coils to bind your work. This type of binding is perfect for work containing up to 440 pages, plus it's not too difficult. Here's how to spiral bind a book:
  • The first thing you need to do is ensure that your paper is punched properly. Spiral binding requires a 43-hole pattern. Most coil binding machines will produce this pattern for you. Just insert some paper into the machine's throat and punch. However, if you are using a coil inserter, you will need to use pre-punched paper or a modular binding punch. And don't forget to punch holes in your covers.

  • Now you need to select a coil for your document. The easiest way to do this is by using your machine's coil selector to measure the thickness of your document and then select a coil that can accommodate all the pages. Since coils are available in so many colors, make sure you choose one that will match the cover or title page of your document.

  • You're almost ready to bind your document. If your book is thick and if your machine has a spine former, make sure you use it. It will curve the spine of your document to make coil insertion a lot easier. How you insert the coil depends on the machine. If the device has rollers, just thread the coil through the first few holes in your document and then let the machine take over. If the machine lacks rollers, just spin the coil through the holes by hand. (It doesn't take very long.)

  • Once the coil is inserted, you will need to crimp the ends of it. You can do this with a pair of crimping pliers. Just hold the document, making sure the coil is facing you. Take the crimpers, ensure that the red dot on them is facing up, and clip one end of the coil. Then, flip the document over and repeat the process on the other end of the coil. You need to do this with every document you bind, even though it's a bit tricky at first. If you skip this step, your books will fall apart and you will need to re-bind them.

  • Just repeat the process for any other documents you need to bind. If you have an electric coil binding machine, make sure you turn it off when you're done so the motor doesn't overheat.

As you can see, spiral binding is pretty easy to do. In fact, the most challenging part of the process is crimping the coil. However, if you practice enough, it will become easier. In fact, you might want to bind a few practice documents before you need to crank out work for an important meeting or presentation. That wayHealth Fitness Articles, you can be sure that your documents will look their best. Good luck and happy binding!


Article Tags: Spiral Bind, Spiral Binding, Coil Binding, Make Sure

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR


Jeff McRitchie is the Vice-President of Marketing for MyBinding.com. He regularly writes articles, reviews, and blog posts on topics related to bookbinding, laminating, paper shredding, and office equipment. More than 2,500 of his reviews have been published in thousands of locations on the Internet. If you're looking for information about binding machines, his articles are a great place to start.



Health
Business
Finance
Travel
Technology
Home Repair
Computers
Marketing
Autos
Family
Entertainment
Law
Education
Communication
Other
Sports
ECommerce
Home Business
Self Help
Internet
Partners


Page loaded in 0.028 seconds