There are a lot of different binding methods, so
each device operates in its own, unique way. Learning how to use a a
new machine can be difficult, especially for people who are new to
document finishing. The Fastback 20 from Powis Parker is a new device
that is large and probably looks a little bit intimating.
There are a lot of different binding methods, so
each device operates in its own, unique way. Learning how to use a a
new machine can be difficult, especially for people who are new to
document finishing. The Fastback 20 from Powis Parker is a new device
that's large and probably looks a little bit intimating. But the truth
is, this is one of the easiest binding machines to use. Continue reading
to discover what you need to do to successfully operate this machine.
Print out your document. The very first thing
to do is print out your work. The Fastback 20 can bind books that are
from 10 to 350 pages long. This binding capacity should be sufficient
for various documents including reports and marketing brochures. You'll
need to make sure that the paper is 12" long or less and that it's no
thicker than 36 lb. stock.
Choose your binding strip. When you use the
Fastback 20, you'll need to use one of the Powis Parker binding strips
that are compatible with this device. The strips come in three sizes
(narrow, medium, and wide) and you can choose from a lot of different
colors. (You can also order customized ones.) These supplies contain
some post-consumer material, so they're environmentally friendly. They
can also be recycled. Make sure you also choose your covers. Both
paperback and hardcovers will work.
Get the machine ready. If you haven't
already, take the Fastback 20 out of the box get it set up. This
shouldn't take long to do. (There are instructions in the user manual
about this process.) Plug the device into the wall, turn it on, and let
it warm up for about three minutes. When the machine is fully warmed up,
you're ready to get going.
Follow the instructions. The device has a
graphical user interface right up front. This feature will show you
every step you need to take to successfully bind your book. It will tell
you when to insert the binding strip. (When you do this, make sure the
adhesive side of the strip is facing up.) Then you need to place your
document in the machine. Make sure the side that will be bound is facing
down. At that point, the device will begin processing your book for
you. Depending on its thickness, the book should be ready in about 10 to
20 seconds.
Let it cool off. After the binding process
is over, you can move the document to the machine's cooling rack so the
adhesive can set. Let it sit for a few minutes. When it's done, flip
through the book. All of the pages should be securely bound and your
document will look great. You can then repeat the process for any other
books that need to be bound.
After reading through this list, it should be evident
that the Fastback 20 binding machine is easy to use. You can choose
from different paper sizes and strips, bind both long and short books,
and it won't take you very long at all. You also get to work with
recyclable supplies and feel good about doing something for the
environment. Try binding your work with the Fastback 20 so you can
quickly produce your most professional-looking work yet.
Jeff McRitchie is the Vice-President of Marketing for MyBinding.com.
He regularly writes articles, reviews, and blog posts on topics related
to bookbinding, laminating, paper shredding, and office equipment. More
than 2,500 of his articles have been published in thousands of
locations on the Internet. If you're looking for information about binding machines, his articles are a great place to start.
