Wire binding is one of the most aesthetically
pleasing binding methods around. This type of binding has been used to
create beautiful books and calendars as well as professional-looking
documents created by real estate agents, office workers, and other
professionals. One of the best features about wire binding is that it
allows your document to lay flat when it's open and you can also turn
the covers and pages around a full 360 degrees.
Wire binding is one of the most aesthetically
pleasing binding methods around. This type of binding has been used to
create beautiful books and calendars as well as professional-looking
documents created by real estate agents, office workers, and other
professionals. One of the best features about wire binding is that it
allows your document to lay flat when it is open and you can also turn
the covers and pages around a full 360 degrees. But to take advantage
of this style, you need the right machine. One option is the James
Burns PB31SP Manual 3:1 Pitch Wire Binding Machine. This is a device
that just came on the market and there are some great things about it.
Here are the strengths and weaknesses of the PB31SP.
Strengths:
The PB31SP can work with both
Wire-O and Double-O binding spines. It can close spines ranging in
thickness from 1/4" to 1-1/4" inches. This is the whole range of sizes
for these spines, so this product is really versatile.
The
punching mechanism of this device can punch 10 sheets of paper in one
lift. It can bind documents that are up a half inch thick with wire
binding spines that are up to 9/16" in diameter.
The PB31SP
has 38 fully disengageable dies that can be removed as needed. This
means you can create your own hole patterns depending of the desired
look of your document. The throat measures 13 inches across.
This
is a device that will punch holes in a 3:1 pitch pattern. This means
three holes will be punched for every inch of paper. This hole pattern
can also be used with 3:1 pitch coil and with GBC Proclick binding
spines.
There's even a hanger on the front of the unit that makes preparing and finishing your documents super easy.
The
PB31SP is 19 inches wide and 12 inches deep. It is large enough to bind
letter-sized documents but not so big it will take up too much room. It
weighs about 24 pounds, so it's not too heavy either.
This
device has a very unique D-shaped handle which is great because it
means it can be used by everybody no matter if they are right- or
left-handed. Many binding machines have handles on either the right- or
left-hand side of the machine. That can make using the device difficult
for some people.
Weaknesses:
This product is available for
the suggested retail price of $495.00. This isn't necessarily a bad
price for a machine with disengageable dies. However, in the current
economy, that sort of price might not be low enough for some potential
users.
As previously mentioned, the PB31SP can only bind
documents that will be 1/2" thick or less. This will be a problem for
users who need to bind thicker booklets. Users who need to bind thicker
documents with wire should really consider a 2:1 pitch wire binding
system.
If you need a wire binding machine, the James Burns PB31SP would be an
excellent choice as long as you will only be binding booklets up to
1/2" thick and you can foot the $495.00 bill. This really is a good
machine, so if it seems right for you, you should go ahead and get one
for your workplace.
If you're interested in buying the James Burns PB31SP Binding Machine, you should really visit MyBinding.com. They have this great product as well as a wonderful selection of other Wire Binding Machines,
and they're all available at low prices. Plus, they offer free shipping
on all orders over $75.00. Check it out for yourself today!
