Know About Pine Tree Stump Removal

Jun 21
08:05

2010

Andrew Stratton

Andrew Stratton

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Removing trees that threaten to damage your home or property can sometimes be necessary, and it would be easy if not for those stumps left behind after your chainsaw has done the damage. Choosing the right ones depends mostly on your patience, your preference, and the amount of labor you wish to perform.

mediaimage
While the general process regarding of a pine tree stump removal is somewhat similar to that of other stumps,Know About Pine Tree Stump Removal Articles there is a difference in the root system that requires addressing. That is to say, these stumps tend to have much larger, flatter root networks than that of other types.

That being said, the most effective techniques with pine may not necessarily be the best idea when dealing with oak or spruce. Taking the time to do this task yourself can save hundreds of dollars. In this article, we will outline the necessary steps to doing just that.

Tools:
1. Shovel
2. Black Plastic Sheet
3. Axe
4. Loppers
5. Handsaw
6. Drill
7. Nitrogen-Rich Fertilizer

In cases involving a smaller one, simply digging around and cutting will likely do the trick. Dig around the area until the root system is almost completely uncovered. Roots can be severed by a saw or axe, but loppers may be more appropriate depending on the root system. All severed roots should be disposed of in the trash or through burning.

For larger trees, the same general idea applies, however the tools used and the overall labor required are a bit different. As with the smaller pines, you should dig around the area to expose the roots. The larger the pine, the more digging there’ll be. An axe or handsaw is preferable to loppers and required to sever the larger root systems.

Prepare yourself for a good day or two of constant chopping. If it is heavy, wrap the chain around it and pull it out by hitching the other end of the chain to a tow hitch. Be sure that the pine is severed completely and that the truck pulls it out slowly.

Another option for removal is to hasten the biodegrading process. Keep in mind that this option can take months. Just as with the manual process outlined above, reduce it to the smallest height possible before hitting the ground. Proceed by boring a rash of holes around 2 inches deep into the top. Add water to each hole and follow it up with a nitrogen-rich fertilizer. Cover the surrounding area with the same mixture.

Next, cover the stump with organic compost and place a black plastic sheet over it, making sure to add a weight to it doesn’t blow away. The plastic absorbs sunlight, which heats the compost, thus speeding up the decay process. Repeat the process every couple weeks until the pine is completely decomposed.