Seeking to offer the marketplace a lot of
features for a low price, the Akiles Roll @ Coil is uniquely positioned
in the world of electric coil inserters. Here,we take a look at the Roll @ Coil's strengths and weaknesses.
Seeking to offer the marketplace a lot of
features for a low price, the Akiles Roll @ Coil is uniquely positioned
in the world of electric coil inserters. Here is a short report in
which we take a look at the Roll @ Coil's strengths and weaknesses.
Strengths:
If you have been shopping around for a coil inserting
machine, you have likely found that there are a wide variety of options
at a wide variety of prices. If your organization is on a budget, and
you have already made a purchase of a machine such as a modular binding
punch, you may well be looking to save some money on your coil
inserting system. That's where we think that the Roll @ Coil really
shines, coming in at a cost of a little less than two hundred fifty
dollars. As we will discuss further, the Roll @ Coil may not have all
the features that some of the other inserters do, but its price makes
it fit within even the tightest budget. It pairs nicely with coil
binding machines to make a great little production line.
This is one case in which low price does not equate to low quality. In
our opinion, the Roll @ Coil is a very ruggedly built piece of
equipment. The case is heavy duty, the components appear to be high
quality, and we see no reason why this machine wouldn't stand up to
years of use. In fact this machine is commonly found in professional
binderies and in-plant print production facilities.
The Roll @ Coil also has a few nice features that you don't normally
find on a lot of coil binding machines. For instance, there is an
alignment channel that helps the user form the spine of the document
when inserting coils of a larger diameter. There is also a pitch
identifying device, and a sizing guide that can help you find the
correct size coil for your book.
Weaknesses:
One slight limitation that we found with the Roll @ Coil is that its
two rollers are fixed. Most of the pricier coil binding systems on the
market let you adjust distances between rollers, which is handy for
spines of a larger diameter. To be fair even the most expensive coil
inserters on the market have some degree of difficulty with larger
diameters, but it should be said that the Roll @ Coil is probably best
suited for diameters up to around twenty two millimeters. Anything
above that, and the degree if difficulty becomes fairly high.
It also must be pointed out that the Roll @ Coil's rollers are smallish
compared so some of the other machines on the market. This is part of
what makes this machine not the best choice for larger diameter wire,
but is not an issue at all for smaller sizes.
The only chink in the Roll @ Coil's rugged armor is the plastic/rubber
belt that drives the rollers. It is of high enough quality, but will
probably wear out over time. It is an inexpensive and easy to replace
part, however. Have an extra on hand just in case, because the machine
won't run without it.
If you are interested in more information about the Akiles Roll @ Coil Heavy Duty Electric Coil Inserter you should really check out MyBinding.com.
They offer a great price on this machine and they even offer Free
Shipping on all orders over $75. Plus, they carry one of the largest
selections of Coil Binding Supplies and binding covers available on the internet. Check them out today!
