Does your company need a manual punch that
can produce hole patterns for a number of today’s most popular binding
methods? If so, you will want to take a look at the Rhin-O-Tuff OD4800.
Here’s all you need to know about this machine’s strengths and
weaknesses.
Does your company need a manual punch that
can produce hole patterns for a number of today’s most popular binding
methods? If so, you’ll want to take a look at the Rhin-O-Tuff OD4800.
Here’s all you need to know about this machine’s strengths and
weaknesses.
Strengths:
This is a manual punch that has totally
interchangeable dies. There aren't many machines like this on the
market, so that makes the OD4800 very unique.
The OD4800
has a decent punching capacity. The most sheets of paper it can
punch per lift is 12. Please note that the punching capacity can vary a
bit depending on the die set you use, as well as the paper your
document is printed on.
There are die sets
available for a variety of different binding methods. Some of the
ones available are for binding with wire, plastic combs, color coils,
and so on. There are even sets available for three-hole punching and
the popular Velobind method. Changing sets is easy and doesn’t
require the use of any tools.
All of the dies in
each set are fully disengageable so you’ll be able to punch the
right amount of holes the size of your document calls for. Also, the
dies are part of Rhin-O-Tuff’s Swing Away Die Pin Retainer System.
This system allows you quick and easy access to the dies while
keeping them in place. It will come in handy if you ever need to
disengage any of the pins.
The OD4800 has an open
throat that’s perfect for punching letter-sized paper (8.5” x11”)
as well as longer documents.
This is another one of
Rhin-O-Tuff’s durable, well-built machines. It was designed for
heavy-duty use and is definitely up to the task.
If
anything happens to go wrong with this device, its one-year warranty
will be there so you can get it repaired or replaced.
Weaknesses:
Although the OD4800 has an open throat, punching
paper that’s longer than 11 inches could be a bit tricky.
One
die set come with the machine but the rest have to be purchased
separately.
This device’s punching capacity is
decent, but it definitely could be improved. It will take you a
long time to punch your document if it’s lengthy.
The
OD4800’s punching handle is on the right side of the machine. This is
great for right-handed users but left-handed people might have some
difficulty using the machine. A D-shaped handle would have been a
much better choice.
The OD4800 is a punch only.
You’ll still need a machine to finish off your documents. Some
finishers can be attached to this machine but it requires a special
kit that’s sold separately. If you need both a finisher and extra
die sets, you’ll wind up spending a fair amount of money.
Overall,
the Rhin-O-Tuff OD4800 is worth a look, especially if you’re looking
for a punch that can produces different hole patterns. It’s great that
it has an open throat and that the dies in every set are disengageable.
Just keep in mind that you need to have finishing equipment on-hand to
complete the binding process and that this machine will definitely be
much more user-friendly for right-handed operators. If all of this
sounds okay to you, be sure to check this product out today.
If you'd like to purchase the Rhin-O-Tuff
OD4800, you should really visit MyBinding.com.
They have this product available at a great price and they also have
all the Binding Supplies that you'll need. Plus, you'll get free
shipping on all orders over $75.00. If you'd like to learn more about
these types of products, you can read all about them at MyBindingBlog.com. Check it out
for yourself now!
