As the only manual binding punch with
interchangeable dies available on the market, Rhino's OD4800 has caused
some well-earned excitement in the binding world. In this article we
will take a closer look at the OD4800 and present you with a list of
what we see as its strengths and weaknesses.
As the only manual binding punch with
interchangeable dies available on the market, Rhino's OD4800 has caused
some well-earned excitement in the binding world. In this report we
will take a closer look at the OD4800 and present you with a list of
what we see as its strengths and weaknesses.
Strengths:
It
should be said that one of the greatest features of the OD4800 is its
low cost. This machine is by far the least expensive option for and
organizations that want the flexibility of being able to bind your
documents using multiple patterns. At around half the price of even the
least expensive electric punch on the market, the OD4800 gives you a
great, affordable option if you don't mind manually punching your
documents.
Because it was designed to use the
same punching dies as the OD4000 modular electric punch, you can
utilize twelve different hole-patterns with the OD4800. Available
patterns include those for plastic comb binding, double loop wire,
three-hole punching, and spiral coil binding. There are also several
custom dies available if you want to produce some other hole-patterns.
The OD4800, like most of Rhino's other modular punches gives you the
ability to attach your finishing device onto the machine. Depending on
what type of finishing device you are attaching, you can either bolt
them to the top or the side. Wire closers, coil inserters, and plastic
comb openers are all able to be attached to the OD4800 helping to save
space and to increase productivity if you are working alone.
One thing that you will always be able to say about the Rhin-O-Tuff
line of equipment is that it is built to last. The OD4800 appears to be
no exception. As far as we can tell, its metal casing and all metal
components should help to ensure that this machine will be able to last
for years without the need for any real maintenance.
Weaknesses
We
are so enamored of the concept of interchangeable dies on a manual
punch, that we find it a little bit disappointing that the punching
capacity of the OD4800 is rated to a relatively low twelve sheets at a
time. It should be said that this is lower than what is offered by the
vast majority of standalone manual machines. It shouldn't be a problem
for organizations who use this machine for lower volume productions.
But if you are going to want to bind larger documents on a regular
basis, you might want to step up to an electric punch, or find a
machine with a slightly higher capacity.
The
OD4800 is delivered with one die set of your choosing, but no finishing
equipment is included. This means that if you want the ability to bind
documents using two different hole patterns, you will need to buy
another die, as well as whatever finishing equipment is appropriate for
each style. This is not a big surprise or anything, but it is something
that should be budgeted for.
Attaching your
finishing equipment can be a process that is a little tricky to figure
out, and when you change out dies, you will need to be sure that the
bolts are in very tight, or the mechanism may slip and affect the
accuracy of the punch.
If you are considering the purchase of the Rhin-O-Tuff OD4800 Binding Punch for your business, you should really check out MyBinding.com.
They offer an excellent price on this machine and they offer free
shipping on all orders over $75. In fact, they carry the entire line of
Modular Binding Equipment from Rhin-O-Tuff along with other great equipment from GBC, Renz, Akiles and Tamerica. Check it out today!
