Roll laminators are some of the most popular
document finishing machines and with good reason. These devices make it
possible for you to laminate a lot of different items from photographs
to banners. The best way to do that is by maintaining it the best
you can. Here are some tips you can use to keep your roll laminator
working:
Roll laminators are some of the most popular
document finishing machines and with good reason. These devices make it
possible for you to laminate a lot of different items from photographs
to banners. If you have one of these machines, chances are you want to
keep it in great shape so you don't have to deal with the hassle and
cost of repairs. The best way to do that is by maintaining it the best
you can. Here are some tips you can use to keep your roll laminator
working:
One of the best things you can do to keep your
roll laminator in good shape is by never using it to process items
covered in glitter. The same goes for metallic materials. These
documents can do some major damage. If glitter gets on to the rollers,
it will be difficult for the machine to transfer heat, which essentially
renders it useless. You definitely don't want that to happen.
Make
sure you keep sharp objects away from your laminator's rollers. This
includes scissors, craft knives, and so on. These implements can nick
and gouge the silicone on the rollers. If that happens, you might need
to repair the machine or even replace it is the damage is bad enough.
Unless
your laminator shuts down automatically, be sure to turn it off when
you're done using it. This helps protect the motor so you can get as
much use out of the device as possible. It also greatly reduces the risk
of fire and injury.
At some point, you may
notice that there is adhesive buildup on the machine's rollers. This
isn't a big deal but it does need to be taken care of. Doing so entails
the following steps:
Remove the roll of laminating film from the device.
Make
sure the machine is on and that the rollers are slowly rotating. You
need to select a warm setting so that the adhesive will soften. Since
the rollers will be warm, be careful so you don't burn yourself.
Take
a soft scrubbing pad and moisten it. Use it to gently scrub the rollers
so you can get all the adhesive off. This step can take a while,
especially if there's a lot of adhesive. Just stick with it and you'll
get the job done.
When all the adhesive is
gone, you can reload the laminating film. It can be convenient to switch
to a new roll of film at this time if you need to.
Finally, if something does goes wrong with your
laminator, be sure to call in a professional. Not only will this ensure
that your laminator will be properly fixed, it can help you avoid
voiding the warranty.
Maintaining your roll laminator is quite easy to do and it's well
worth it to take the time to do so. You'll be able to keep your machine
in good shape so you can laminate documents when you need to and get
great results. Start maintaining your roll laminator today. It really is
worth it.
Jeff McRitchie is the Director of Marketing for MyBinding.com.
He regularly writes articles, reviews, and blog posts on topics related
to bookbinding, laminating, paper shredding, and office equipment. More
than 2,500 of his articles have been published in thousands of
locations on the Internet. If you're looking for information about roll laminators his articles are a great place to start.
