What Makes a Good Quality 6 AWG Welding Cable

May 24
19:05

2017

Anas Jafri

Anas Jafri

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Welding cables are not only used for welding but a number of other applications that fall within the 600V range.

mediaimage

Welding cables are not only used for welding but a number of other applications that fall within the 600V range. The thicker ones like the 6 AWG cables are quite commonly used in cranes too. In welding,What Makes a Good Quality 6 AWG Welding Cable Articles their main purpose is to connect the electrode holder to the welding tool. Usually cables used for this purpose range between 6 AWG to 4/0 AWG.

The thicker the cable, the more durable and tough it is. Such cables have higher strand counts for enhanced flexibility and can tolerate higher temperatures too.

Your welding cable is a vital part of your welding equipment. You can’t afford to compromise on its quality. Before you buy one, make sure you understand what makes a good cable.

Copper Strands

Strand counts are the backbone of your welding cable. They have a direct impact on a cable’s flexibility and durability. There are two types of stranding used in welding cables i.e. Class K and Class M.

Class K is the most popular type and contains 30 AWG copper strands. These have regular, plain-colored red or black jackets. Class M cables, on the other hand, are stronger with 34 AWG strands. These are much more expensive due to the increased amount of copper used in their make. Their fluorescent jackets set them apart from Class K.

Class K should be your go-to welding cable. EWCS welding cables all fall in this category. Always make sure you know the strand count of a welding cable before you buy it. Many manufacturers sell welding cables saying that they are ultra-flexible and charge a premium for them. Keep in mind that there are only two types of cable, Class K and Class M and you can’t trust a seller who says otherwise.

Other Considerations

Quality welding cables have quality thermoset jackets. Usually made from EPDM or neoprene, these jackets give your cable-enhanced insulation against high temperatures. When you are welding, things are bound to get hot pretty quickly. You need well-insulated cables that can take the heat. ECWS makes welding cables rated -50 to +105 degrees centigrade.

Also ensure that you get the right AWG size of welding cable. A small 2/0 AWG cable will burn out within minutes when connected to a machine with a high power rating. The size of your welding cable depends on the rated output of your welding machine, its duty cycle and the total length of the welding circuit. 6 AWG welding cables are the strongest welding cables you can find, and are a safe bet in most cases. You can always get in touch with us to find out what size cable to buy.

Trust EWCS for the Best 6 AWG Welding Cables

EWCS has been an industry leader in cables since 1994. Our 6 AWG welding cables contain 403 strands of pure Class K copper, insulated with state-of-the-art EPDM rubber. You can have your choice of color with red, black and yellow on offer. Made in their entirety in the USA, our cables are the epitome of good old-fashioned American values. Coil lengths of 25, 50 and 100 feet are available and larger lengths can be ordered specifically. Call now on 800.262.1598 or contact us for reliable welding cables that will stay by your side for a very long time.