Free Articles, Free Web Content, Reprint Articles
Sunday, May 27, 2012
 
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles
ADVERTISEMENTS
 

Would you Like to Make your Own Unique Cornhole Board in Just 6 Easy Steps?

If you have fun while playing cornhole game and are a kind of person who can do your work yourself, here is a set of easy cornhole game plans for how to create the game set yourself, beside the plans there is a list of recommended tools.

One would enjoy making their own cornhole set by making use of the easy cornhole plans.

Recommended Supplies and Tools

Three- 2" x 4" boards - eight' long, one and a half" plywood sheet - 4' x 8', one box of deck screws

Tape Measure, Drill, 150 grit sandpaper, Circular or miter saw, Jig saw


Step One

Hold the 4x8 plywood sheet of and slash it into four identical parts, each one 2x4. Then take one part and cut it into four parts that are 11 1/2" x 2'.

Step Two

Hold two of the 2x4x8' boards and slash then into four equivalent lengths. They must be 3'x11 1/2". They are this dimension in order that a riser can be added afterwards to tip your completed board.

Step Three

Next step is to take all of the 3'x11 1/2" boards and fix then with screws to every long side of the platform. Have a 1/2" gap at the edge you wish to be the top of the cornhole board.

Step Four

Evaluate between the side railing boards for the correct dimension for the bottom and top rails on every platform, then slash the left over 2 x 4 to match those dimensions. Then fix those cut parts, on edge, with screws.

Step Five

Put the platform on the floor, with the right side upward. You are about to come across the cornhole position so you need to go to the top of the board. That is the edge that does not have a rail. Locate the hub of the cornhole by calculating nine from the topComputer Technology Articles, then twelve from all the sides. This will help you locate you the hub of the cornhole.

Step Six

Now hold one of the 11 1/2" x 2' boards and fix it on top of the cornhole. It will fix into that 1/2" gap and get attached with the screws to the side boards.

You are at present all set to play cornhole. If you wish to color the board it is recommended that you make use of a primer and then polish enamel.


Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR


Cornhole store your one stop source for eveything cornhole. One stop source for the highest quality cornhole bags, cornhole accessories and cornhole boards guaranteed.



Health
Business
Finance
Travel
Home Repair
Technology
Computers
Family
Communication
Entertainment
Autos
Marketing
Self Help
Sports
Home Business
Education
ECommerce
Law
Other
Internet
Partners


Page loaded in 0.262 seconds