Free Articles, Free Web Content, Reprint Articles
Thursday, April 2, 2020
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles

Cisco CCNA, CCENT, And CCNP Home Lab Study: The DTE/DCE Cable

Part of putting your own Cisco home lab together is getting the right cables for the job!  In this installment of this exclusive Cisco home lab tutorial series, learn how and when to use DTE/DCE cables in your home network.

More Cisco CCNA, CCENT, and CCNP candidates than ever before are putting together their own home labs for their certification exam study, and that's a great trend - there's nothing like learning on the real thing!

Part of putting a home lab together is getting the right cables and understanding their usage. In this new Cisco home lab series, we'll take a look at the different cable types and how each fits into your home lab.  The first cable type we'll look at is the multi-purpose DTE/DCE cable.

When I say "multi-purpose", I mean that while the cable will always perform the same task, it can be used in several different points in your home lab network. If you're going to have a frame relay switch - and you should get one if at all possible, since having your own frame relay cloud is a tremendous boost to your home lab studies and your exam score - you're going to need a DTE/DCE cable.

You can also use a DTE/DCE cable to directly connect two Cisco router serial interfaces and configure HDLC (the default) or PPP encapsulation over that point-to-point link.

Most of today's DTE/DCE cables have "DTE" clearly stamped on one end of the cable - actually, "DTE" is probably embedded into the connector itself.  Naturally, the other end will have "DCE" clearly indicated.  It's the DCE end that will connect to your frame relay switch.  If you're going to use a direct connection to run PPP or HDLC, it almost doesn't matter which end of the cable is connected to a given router.

Keyword: "almost".  You must use the clockrate command on the DCE end of the connection in order to bring the line protocol up. 

If you're not sure which end of your DTE/DCE cable is connected to a given serial interface, just use the show controller serial command to get that information. Most of the output of that command isn't comprehensible, but what we need is right on top:

R3#show controller serial 1

HD unit 1, idb = 0x11B4DC, driver structure at 0x121868

buffer size 1524  HD unit 1, V.35 DCE cable

Naturally, if it's the DTE end, you'll see "DTE" there.  And if you don't have anything connected to that interface, you'll see "no cable".

Whether you have your own frame relay switch or not, you'll want to pick up some DTE/DCE cables for direct connections between your Cisco home lab router's serial interfaces.  Just don't forget to put the clockrate command on the DCE end of the cable!   And if you're not familiar with a frame relay switch, check this same website soon for a tutorial that will show you how to set one up. 

Just about any Cisco router can serve as a home lab frame relay switch, and once you've got it configuredFree Articles, you're in good shape - but it can be a little maddening to get it up and running in the first place.  I'll show you how to avoid that aggravation in the next installment of this Cisco home lab tutorial series!

Source: Free Articles from


Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage ( ), home of free CCNA and CCNP  tutorials, and The Ultimate CCNA and CCNP Study Packages.


For free daily CCNA, CCNP, CCENT, Network+, Security+, and A+ questions, just visit the website and sign up for the daily newsletter! 

Home Repair
Home Business
Self Help

Page loaded in 0.325 seconds