4 processing methods of LSAW steel pipe

Sep 16
17:18

2021

Lily Chung

Lily Chung

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

4 processing methods of LSAW steel pipe.

mediaimage

Processing methods of LSAW steel pipe:

1 Forging : a pressure processing method that uses the reciprocating impact of a forging hammer or the pressure of a press to change the blank into the shape and size we need.

2 Extrusion: It is a processing method in which the steel puts the metal in a closed extruder and applies pressure at one end to extrude the metal from a prescribed die hole to obtain a finished product with the same shape and size. It is mostly used for the production of non-ferrous metal materials.

3 Rolling: A pressure processing method in which a steel metal billet is passed through a gap between a pair of rotating rolls (various shapes),4 processing methods of LSAW steel pipe Articles and the cross-section of the material is reduced due to the compression of the rolls and the length is increased. ��

4.Drawing steel: It is a processing method in which rolled metal blanks (forms, tubes, products, etc.) are drawn through a die hole to reduce the cross-section and increase the length, which is mostly used for cold working.

Changsha Xiangjia Metal Materical Co., Ltd. the Steel Pipe Division of ADTO GROUP, is one of the leading manufacturers of steel products in China. We specializes in manufacturing all kinds of steel pipe in various grades and sizes. Years of production experience and manufacturing facilities who have a capacity of 200,000 tons per annual will ensure the good quality and competitive duration of our products.