Selecting A Cheap Boiler

Aug 9
08:53

2016

Brian J White

Brian J White

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

There are many kinds of hot water and heating boilers in the market. Which one to choose makes it difficult and depends a lot on your budget.

mediaimage

A wrong boiler installation could end up being a very annoying,Selecting A Cheap Boiler Articles expensive mistake. Do not let the range of products and systems confuse you though. Below are the different types of boilers that provide a cheap solution for your home.

Conventional boilers

This kind of traditional boiler comes in a range of sizes to suit all homes and is capable of producing large amounts of hot water. A conventional boiler installation has several different elements in addition to the boiler itself. There are a pump and variety of controls, plus a hot water cylinder and a cold water tank. The larger the house, the greater the number of bathrooms, the more capacity you need from your boiler installation in terms of its power and size of your cylinder. Conventional boilers are often placed in a kitchen, utility room or cellar with the cylinder in an upstairs cupboard and cold water tank in the loft. Even if you have low water pressure, a conventional boiler can use gravity to give a stronger flow rate. Conventional boilers meet high demand for hot water, but require plenty of space.

Combination or combi boilers

This kind of boiler combines all elements of a conventional hot water and heating system in one appliance. This means to say that the pump, control valve, cylinder and thermostats are all within the boiler. One crucial difference from a conventional boiler installation is that there is no need for water cylinders or tanks as the water is heated on demand, straight from the mains. Many are small enough to fit in a kitchen cupboard. This kind of combi boiler installation requires a good level of water pressure to work properly. These appliances have been greatly refined over recent years and can now produce as much as 18 liters of water a minute at 100 degrees Fahrenheit. Combination boiler installations are now an extremely popular choice for flats and small houses as they take up much less room than a conventional setup and save costs by heating water only when you need it. These boilers are neat space savers, are cost effective, give instant hot water and are best for flats and small houses with good water pressure.

Condensing boilers

Condensing boilers are boilers that use a specific technique for saving energy. Both conventional and combi boilers can incorporate this technique and most of them are thus also a condensing boiler. It simply means that the gasses released by the boiler’s burners are cooled to condense the water vapor in them and release their latent heat. This increases the heat the boiler provides and makes it around 90% efficient. It is always worth considering the savings on heating bills that a highly efficient boiler installation brings. Always check the efficiency rating of an appliance to get the most out of your heating and hot water system. Condensing the fumes given off by the burners increases the efficiency of both conventional and combi boilers.

Conclusion

Finding the right boiler is easy if you do your research correctly. You can look at local companies and search online to find the best deals, based on the information above. Another great tip to finish this article: When choosing a business to install your boiler, always look for companies that are legally allowed to install boilers and have the experience to do this safely. You can find them by checking if they are “Gas Safe Registered”