Sliding Glass Door Repair Made Easy
Sliding doors are meant to open and close smoothly with almost no sound. Not only that they should also provide some protection by the locks and keep out cold air when they’re closed.
It’s no secret that with time almost any sliding door will become either rusty or just plain difficult. Of course sliding doors that are made with metals are heavier but note that doors made from aluminum also become heavy because of the distributed weight of the glass. These in turn place much pressure on the rollers, wheels, other parts and track and when you place a few years on top of that story then what you’re left with is a little problem called “I can’t get my glass sliding doors open anymore”.
When doing some homework on repairing these doors you’ll probably find that the process is obviously similar to “how to install a sliding glass door” so when you’ve completed this project you are definitely on your way to understand how it all fits together.
How to repair a sliding glass door
So here are some steps on how to repair a sliding glass door that you can use as a short guide to help you get the job done as quickly as possible:
• First make sure that you have all the tools necessary like screwdrivers, hammers, wood bits(in case), electric power drills, gloves and anything else that you may need that’s not listed here.
• Sliding doors brands differ slightly but the principle is the same, so carefully remove the siding doors from the hinges and track using the appropriate methods suited to the specific door and be cautious when you do it.
• Once off you can remove the rollers/wheels and clean the bottom edge of the door. Keep the rollers for now.
• Clean the tracks of any muck and grime thoroughly
• Take rollers to the shop and get exact same ones and anything else not mentioned here. Return home
• Once home you can replace the old with the new and grease as needed.
• Do not apply oil to tracks as this collects dirt fast.
• Gently put sliding door back and test. Voila!
Sliding glass door repair jobs can be done in as little as two hours if your plan your time right. Always wear protection like gloves or glasses when working with power tools and items around the home.
Source: Free Articles from ArticlesFactory.com
ABOUT THE AUTHOR
His dad was a shipping magnate and because of that, Marc and his family had to travel with him constantly.He gained a lot of knowledge through that. With his dad's influence he went into importing and exporting and this kept him on the road. He is settled in one place now and find it most fulfilling in writing articles. View more articles at www.slidingglassdoorguide.com.