AF Power Roof Fans utilize vaneaxial and tubeaxial fans to which a separate damper head and curb sheet are attached. Their construction incorporates flanged wind band, or shroud with rain gutter, supplied with integrated gravity automatic dampers pivoted in bushing bearings.
Type AF Power Roof Ventilators utilize vaneaxial and tubeaxial fans to which a separate damper head and curb sheet are attached. Their construction incorporates flanged wind band, or shroud with rain gutter, supplied with integrated gravity automatic dampers pivoted in bushing bearings, dampers stops and flange, tube-axial, or vane-axial fan stack, available in direct drive - arrangement 4, or belt drive with belt tension adjustment arrangement 9 configuartion, motor cover, or belt gurad, gussets, heavy duty fan wheel, available with a variety of motors, corrosion an dmoisture resistant finishes.
Canadian Blower PRV Power Roof ventilators provide clear evidence of the continued leadership of Canadian Blower in the engineering development and manufacture of ventilating fan packages for industrial and commercial ventilation. Canadian Blower Company axial roof fans cover sizes ranging from 15" to 84" wheel diameters with capacities from 2000 CFM to 200,000 CFM.
PRV Power Roof Ventilators is a low-silhouette, factory assembled package unit constructed to withstand hurricane force winds. It construction incorporates galvanized steel wind band, rain gutter, automatic dampers (gravity action) with damper bearings and damper stops, optional stack for true vertical discharge, gussets to fasten the wind band to the stack, streanlined die formed Venturi closely shrouding fan prop/wheel, heavy duty prop supplied in variety of designs, roof curb sheet with flanged edges, totally enclosed air over high efficiency motors, special coatings for corrosion and moisture resistance. This type of power roof ventilator is available in Tilt-Up construction, which provides access to drives and motors direct from the roof.
FRP Construction - Fiber Reinforced Polyester corrosion resistant construction is available for all up-blast power roof ventilators along with protective coatings for corrosive exhaust fumes or atmosphere including synthetic vinyl plastic and a cathalytic epoxy coatings.
Corrosion resistant construction and chemical duty construction: for corrosive environment wall fans are avaialble in 304 SS, 316 SS, or 316 L stainless steel construction.
Emergency Duty Purge Up-Blast Ventilators incorporate elements of sealed and high-temp. consturuction for emergency fume and smoke exhaust.
Various building studies indicate that the most likely sources of this problem are - poor ventilation, poor thermal conditions, too high or low humidity, emissions from office machines, copiers and other building contaminants and poor ergonomic layout of workstations.
For additional information please refer to http://canadianblower.com
Oleg Tchetchel Industrial Process Engineer Canadian Blower Co. email@example.com http://canadianblower.com/blowers/index.html http://canadianblower.com/oem/index.html