The thickness in coating is directly responsible for quality of the product and also helps in the process control and the reduction in cost. The paint thickness are measured with different types of instruments and used in various painting industries and manufacturing units.
In a paint or coating the process control, quality control and its cost effectiveness depends on the thickness of the product. The paint thickness are measured with many types of instruments and deployed in various painting industries and manufacturing units. The thickness is as important to the end user as well as to the manufacturer. The end user can know the limit of quality test done during the making process through its precise specification. Incidentally the difference of opinion about the product specification and its thickness occurs when manufacturers and the end users use different type of measuring instruments. Again various kinds of coating will need different type of measuring instruments. This is because a paint coating has substrate coating, thickness, cost and its shape. Specific measuring methods are helpful for destructive and non destructive dry-film, powder coatings and liquid coatings. Normally magnetic gauges are used in ferrous substrates. Coatings above metals like steel and iron stick to this method. The magnetic attraction is more on thinner coats then in the heavily coated area. You have pencil types models with 10% forbearance, roll back dial models which are simple to use in any position and carry a tolerance of 5%. With OBSNAP you will find several thickness measuring gauges that is used for coating as well as for painting. They are Microprocessor Coating Thickness Gauge, Coating Thickness Gauge, Digital Coating Thickness Gauge, Digital Magnetic Coating Thickness Gauge, Magnetic Coating Thickness Gauge, Paint inspection gauge (PIG), Ultrasonic Coating Thickness Gauge, Wet Film Thickness Gauge, Wheel Wet Film Thickness Gauge Type NS10 and Coulometric Coating Thickness Gauge. These are used for surface evaluation of coating, in automotive industry, electrical appliances and many more. Their equipments are dependable, steady and acclaimed as the more effective instrument by numerous users the world over. They not only sell the product but have a good store of spare parts and also calibrate the instrument when required. You have to refer to the type of work you propose the instrument for and they will propose you with the best available model that will fix your problem. Their instruments are known for high accuracy, better display and precision. They comply with the international standards and are highly desired measuring instrument.
