How to get the cheap watch camera?

Sep 27
07:10

2012

miyoung

miyoung

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Many parents are unsure or nervous about leaving their kids in the midst of a babysitter or a neighbor.

mediaimage

Making a portable watch camera doesn't require much time. All you need are some materials in addition to the right guidelines (which are mentioned below). Plus,How to get the cheap watch camera? Articles you don't have in the direction of spend hundreds of dollars just in the direction of have a hidden camera in your house.  For the spy camera, using a webcam will be very easy in the direction of recognize. With the intention of is why we'll separate the circuit board along in the midst of its lens in addition to the cable as of its plastic enclosure. You need in the direction of make sure with the intention of the end cable in addition to the camera lens stay fixed in the midst of the circuit board. The following article will show you necessary steps on how in the direction of make a watch camera at home. Just follow the instructions in addition to find out if the babysitter or neighbor is doing something wrong behind your back.

The watch camera available in stores either have screw-on case or are glued. The ones in the midst of screws are easy in the direction of work with, however if you do purchase one with the intention of doesn't have screws, you'll need in the direction of break it open. Wear protective eyeglasses in addition to hand gloves, take a screwdriver, pliers, and/or knife in the direction of open the casing of the webcam. A screw-on webcam lens is fitted in the midst of a 12mm thread mount (standard for any CCTV lens). Open the case very gently in addition to try not in the direction of break or make any cracks on it. Make sure with the intention of the watch camera you purchase has a wide angle lens as well. This will help you zoom in/out in addition to get a wider angle of the room or house as well. Now we have in the direction of find a new case for your spy camera. Select a desk lamp, alarm clock, or even a cell phone charger/power supply as they have enough space in the direction of hold the camera.

For the purpose of the article, we will go in the midst of the cell phone charger. Take a chisel in addition to hammer in the direction of carefully open it. Make sure you don't break the cell phone charger case (the insides in addition to cord don’t matter). The flat metal pins which plug in the direction of the outlet are screwed in the direction of the transformer, in addition to is perfect as it gives your spy cam a "real" charger look. Just unscrew them, place the watch camera came in, in addition to screw the metal pins back on. If the charger you choose doesn't have the screw-on metal pins, you can take the metal pins off in the midst of the pliers in addition to glue them back on the case once you're done. Figure out a way in the direction of position the circuit board in addition to also where in the direction of drill a hole for the lens. Remember, the most important aspect is in the direction of make it look as real in addition to as natural as possible.