Radio Controlled Helicopters

May 25
09:18

2012

paul polkinghorne

paul polkinghorne

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Radio controlled helicopters (also RC helicopters) are model aircraft which are distinct from RC airplanes because of the differences in construction, aerodynamics, and flight training.

mediaimage
Radio controlled helicopters (also RC helicopters) are model aircraft which are distinct from RC airplanes because of the differences in construction,Radio Controlled Helicopters Articles aerodynamics, and flight training. Several basic designs of RC helicopters exist, of which some (such as those with collective pitch, meaning blades which rotate on their longitudinal axis to vary or reverse lift) are more maneuverable than others. The more maneuverable designs are often harder to fly, but benefit from greater aerobatic capabilities. Flight controls allow pilots to control the collective and throttle (usually linked together), the cyclic controls (pitch and roll), and the tail rotor (yaw). Controlling these in unison enables the helicopter to perform most of the same maneuvres as full sized helicopters, such as hovering and backwards flight, and many that full sized helicopters cannot.

The various helicopter controls are effected by means of small servo motors, commonly known as servos. A piezoelectric gyroscope is typically used on the tail rotor (yaw) control to counter wind and torque reaction induced tail movement. This gyro does not itself apply a mechanical force, but electronically adjusts the control signal to the tail rotor servo. The engines typically used to be methanol powered two stroke motors, but electric brushless motors combined with a high performance lithium polymer battery (or lipo) are now more common and provide improved efficiency, performance and lifespan compared to brushed motors, while decreasing prices bring them within reach of hobbyists. Gasoline and jet turbine engines are also used.

Common power sources are nitro (nitromethane methanol internal combustion), electric batteries, gas turbines, petrol and gasoline. Mechanical layouts include cyclic/collective pitch mixing (CCPM) in all power sources, fixed pitch electric rotors and coaxial electric rotors. Practical electric helicopters are a recent development but have rapidly developed and become more common, overtaking nitro helicopters in common use. Gas turbine helicopters are also increasing in popularity, although the high cost puts them out of reach of most people.

Nitro or glow fuel helicopters come in different sizes: 15, 30, 50, 60 and 90 size. These numbers originated from the size of engine used in the different models (0.30 cu in, 0.50 cu in and so on). The bigger and more powerful the engine, the larger the main rotor blade that it can turn and hence the bigger the aircraft overall. Typical flight times for nitro helicopters is 7-14 minutes depending on the engine size and tuning. The maximum height of operation for RC helicopters, be it nitro or electric, is only limited to the height at which the controller can see the model. Most radio systems have a range of over a mile, and the person controlling the model will have long lost sight of the model.

Two small electric helicopters emerged in the mid 1990s. These were the Kalt Whisper and the Kyosho EP Concept, flying on 7/8 1200 mah NiCad batteries with brushed motors. However, the 540 brushed sized motors were on the limit of current draw, often 20-25 amps on the `hotter' motors, hence brush and commutator problems were common. S107 metal series Recent advancements in battery technology are making electric flying more feasible in terms of flying time. Lithium polymer (LiPo) batteries are able to provide the high current required for high performance aerobatics while still remaining very light. Typical flight times are 4-12 minutes depending on the flying style and battery capacity.

Small fixed pitch helicopters need a 4-channel radio (throttle, elevator, aileron, rudder), although micro helicopters that utilize a 2-channel infrared control system also exist; while collective pitch models need a minimum of 5 channels with 6 being most common (throttle, collective pitch, elevator, aileron, rudder and gyro gain). Because of the normal interaction of the various control mechanisms, advanced radios include adjustable mixing functions, such as throttle/collective and throttle/rudder. RC Helicopters usually have at least four controls: Roll Cyclic Pitch, Elevator (Fore Aft Cyclic Pitch), Rudder (Yaw) and Pitch/Throttle (Collective Pitch/Power).