Powis Parker Fastback P31 PowisPrinter Keyboard Error Messages

May 21 08:32 2009 Jeff McRitchie Print This Article

Fastback PowisPrinter has an LCD display on the keyboard included with the printer. This LCD allows you to choose all sorts of options and makes the printer capable of producing printed titles without the need for a computer.

One of the great things about the Fastback PowisPrinter is that it has an LCD display on the keyboard included with the printer. This LCD allows you to choose all sorts of options and makes the printer capable of producing printed titles without the need for a computer.

However,Guest Posting the LCD also serves as a message board that tells operators when there are problems with the printer. This article will list the different Error messages that are commonly displayed on the PowisPrinter LCD and will provide you with a quick explanation of their meaning.

Error #1: Please Remove Strip From Feed Entry This error is usually caused by a chute jam. Your strip may have been loaded incorrectly or might have become skewed as it entered the feed chute. Remove your strip, check the chute and try again.

Error #2: Strip Loading Error - Please Remove the Strip and Try Again This error has the same meaning as error #1. Remove the strip, check the feed chute for a potential jam and try feeding the strip again.

Error #3: Cartridge Empty - Please Insert A New One This error simply means that you need to insert a new foil cartridge into the printer in order to continue.

Error #4: Strip Too Short - Minimum Strip Length is 8.25 Inches If you are trying to print a strip that has been cut down to a length shorter than 8.25 inches the machine will not work. Use a longer strip and then cut it afterwards if necessary. If you get this error when printing a strip longer than 8.25 inches long you will most likely need a service call to replace a damaged sensor.

Error #5: Strip Too Long - Maximum Strip Length is 14.0 Inches This error can occur if you attempt to print a 14-7/8" long strip. If you get this error when you are printing a strip less than 14 inches long you will most likely need a service call to replace a damaged sensor.

Error #6: Wrong Strip Width This message is simply telling you that you are inserting the wrong strip width into the machine. When designing your strip you can tell the PowisPrinter the number of pages, thickness in inches or thickness in mm. The PowisPrinter will choose the correct size of strip according to these settings. If you want to use another strip size you will need to change this setting in your strip design.

Error #7: Hatch Open - Remove the Strip before Closing This message is usually telling you that there is a hatch jam that needs to be fixed before you can proceed with the printing. Open the hatch, fix the jam and try printing again.

Error #8: Strip Jammed: Open Hatch and Remove This error message has the same meaning as error #7. Remove the jammed strip and try printing again.

Error #9: Cartridge Door Open - Close Door to Resume This means that the side door on the unit is open or not completely latched. Close the door and you should be able to proceed.

Error #10: Operation Printhead Is Too Hot - Wait 5 Minutes This error can occur after prolonged printing with the PowisPrinter. You will need to wait for the printhead to cool down before proceeding. Maybe it is time for a coffee break.

Source: Free Guest Posting Articles from ArticlesFactory.com

About Article Author

Jeff McRitchie
Jeff McRitchie

If you are interested in more information about the Fastback P31 or are looking for Fastback Binding Machines or Fastback Binding Strips you should visit MyBinding.com. They are the largest online dealer for Powis Parker Fastback products in the United States. In fact, they carry the entire line of Powis Parker Fastback binding products.

View More Articles