How to Cut Perfectly Straight Lines

Mar 13 07:46 2012 Jeff McRitchie Print This Article

When it comes to cutting paper, there are many tools available. Scissors, for example, are the most ubiquitous and they can be found in the drawers of just about every desk in the country. GBC Zippy knives are also frequently used cutting tools, especially with people who laminate on a regular basis. Here some information about them and how you can use them:

When it comes to cutting paper,Guest Posting there are many tools available. Scissors, for example, are the most ubiquitous and they can be found in the drawers of just about every desk in the country. GBC Zippy knives are also frequently used cutting tools, especially with people who laminate on a regular basis. However, it can be difficult to get a perfectly straight line with these tools. Luckily, there are some things you can use to cut straight lines. Here some information about them and how you can use them:

  • Rotary trimmers. A rotary trimmer is a great choice for anyone who needs to cut straight lines. These trimmers come in various sizes. Some are small enough to fit in a desk drawer while others can handle large sheets of paper and posterboard. To use a rotary trimmer, simply slide your paper under the cutting rail and align it using the trimmer's ruler and/or grid. Grab the housing containing the blade and swipe it up and down. To make cutting as easy as possible, make sure you pay attention to the trimmer's cutting capacity, i.e. the number of sheets it can cut at once. If you try to cut too many sheets, you'll have a difficult time.

  • Guillotine trimmers. When people think of paper cutters, they tend to imagine a guillotine trimmer. As you can tell by the name, these cutters utilize a guillotine-like blade that you bring down in order to cut your paper. Using a guillotine trimmer is very similar to using a rotary cutter. You place your paper under a cutting rail, line it up appropriately, and then bring the blade down slowly. However, you need to take more safety precautions with these cutters, such as latching the blade when you're done with your project. Needless to say, guillotine trimmers can be very dangerous, so you need to be very careful when using one. Go slow, take your time, use the blade latch, and don't horse around when using one.

  • Craft knives. If you don't have a lot of paper to cut or if you would rather not use a rotary or guillotine trimmer, using a craft knife is a good option. The craft knife should be used in conjunction with a straight edge or ruler so you can get those perfectly straight lines. Be careful when using a craft knife because it's easy to accidentally cut yourself with one.

  • Stack cutters. Finally, a stack cutter is a great choice if you need to cut a lot of paper in a flash. Not only can a stack cutter cut straightly, it can usually slice through hundreds of sheets at once. Most stack cutters have buttons on either side of the device that you need to press at the same time to process your paper. (This is obviously done for safety reasons.) Since the operating instructions vary a bit from machine to machine, it's important to familiarize yourself with the cutter's operating manual. It will fill you in on exactly how to operate the device.

Cutting perfectly straight lines is easy no matter which method you choose. Just be sure to exercise caution so you can cut your paper without accidentally hurting yourself. Good luck!


Source: Free Guest Posting Articles from ArticlesFactory.com

  Article "tagged" as:
  Categories:

About Article Author

Jeff McRitchie
Jeff McRitchie

Jeff McRitchie is the Vice-President of Marketing for MyBinding.com. He regularly writes articles, reviews, and blog posts on topics related to bookbinding, laminating, paper shredding, and office equipment. More than 2,500 of his reviews have been published in thousands of locations on the Internet. If you're looking for information about paper handling equipment, his articles are a great place to start.

View More Articles