Mar 11 22:39 2020 dgjinaj Print This Article

Restoration Company Toronto

Getting rid of mold in the home takes time and needs patience. It’s essential you don’t just ignore mold growing in your home. You have also to give off toxic spores and vapors which can be dangerous to the health possibly resulting in allergic reactions. So think that the ‘miracle’ mold killer you picked up at the supermarket probably don’t serve for anything. You need a professional mold remediation team to take care of your property.

  • Assess The Damage

As a professional mold remediation company,Guest Posting we will inspect all mold problems. Before the start we will work out what kind of surface the mold has attached to:

If the mold is on something like textile, clothing or furniture, there’s a good chance it can’t be completely removed and it may need to be thrown out. So remember that anything like wicker baskets, textiles, paper, and cardboard or carpet needs to be chucked away.

Related with other areas like in your bathroom, mold is a separate mention. Mold in a bath is a big problem and getting rid of it is almost impossible. Therefore, it is much easier to prevent mold than to clean up it.

  • Vacuum The Mold

After we assess the damage the next step is to vacuum up the mold. We work with professional equipment but if you have small surfaces and you can vacuum by yourself, we recommend using a vacuum cleaner with a good HEPA filter, otherwise, you could be making the problem worse by spreading the mold around.

  • Mold Remediation

At home conditions, our mold remediation experts recommend using diluted vinegar, which causes mold to overheat and die.


It is recommended to pour a concentration of 80% vinegar to 20% water into three buckets. Grab a cloth (if it’s possible a microfibre cloth) and dip it into the first bucket, then use it for cleaning a patch of mold. The same cloth you should then be rinsed in the second bucket, then rinsed again in the third one. This helps to make sure that cross-contamination doesn’t occur.


Commercially available mold cleaning products may look like they’re doing the job, but it’s probably an illusion. You have to know that most of them use bleach as an active ingredient. Our professional team tells you that there’s evidence that bleach can kill fungi, but it needs to be at a 10% concentration to work. But even at a higher potency, bleach won’t penetrate porous materials, so if the mold is growing on plaster, grout or wood, it will kill mold on the surface, but not below it.

But although mold can be difficult to remove from surfaces, there are a few products that work to remove mold for good. Except for vinegar here are some other mold remediation products.


If you’re looking for something a little more potent than a vinegar and water dilution, try mixing vinegar with baking soda. After doing so, rub the mixture on the heavy mold buildup and let it sit for a few minutes. When you wipe the surface with a clean cloth, the mold should be gone!


Another very effective method for mold remediation from any surface, tea tree oil helps mold lift from any surface in a matter of a few hours.


After the mold remediation process, you should try to use these tips to keep mold away.

  • Tip1: Ventilate The Area

Maybe the main reason mold grows is because there is too much moisture in the air that stays on surfaces. Remember, ventilate the area, the extra condensation won’t build-up, and mold may not form in the first place.

  • Tip2: If Something Is Wet, Dry It Up

If it happens that you spill water on something like your carpet or furniture, ensure to dry it up to the best of your ability. Allowing the water to sit can cause mold to form beneath the surface.

  • Tip3: Don’t Allow Wet Clothes To Sit In The Washer

Not everyone likes doing the laundry, but leaving wet clothes in the washer can spell trouble. Moisture environment is the perfect place to mold spores to grow, so you’ll want to ensure that your wet clothes make it to the dryer as soon as possible. Even though you might not see mold on your clothes, you’ll be able to smell it. It can affect the health of you and your family.


CPR24 Restoration is a full-service mold remediation company. What it means is that we offer the full scale of solutions needed for complete removal and prevention of mold. From identifying the cause of mold to fixing any design flaws or tubing associated with it to repairing or replacing the affected areas, and the prevention of further mold by removal and sealing to rigorous testing to detect any traces of new mold, we strive to be a leader in the mold solutions industry.

By following our team tips, you easily will remove mold in areas such as bathroom walls and floors, however, if you have a significant mold issue, please call CPR24 Restoration here.

Source: Free Guest Posting Articles from

  Article "tagged" as:

About Article Author


CPR24 Restoration Team

View More Articles