What to Do After the Installation of an Above Ground Pool

May 22 08:32 2012 Cedric Loiselle Print This Article

Above ground swimming pools require testing after installation and before usage. The water may look clear,Guest Posting but it may not be that safe. It may need conditioning after you have added chemicals to disinfect it.

Run the pool’s filtration system.

Above ground pool supplies include a pump and cartridge filter, which are essential to the water quality of your facility. The pump is responsible for circulating the water throughout its system. The cartridge filter collects unwanted solid contaminants and provides chemical treatment to the water. Both the pump and filter help make the water clean and suitable for swimming. The running time of pumps and filters depends on the size of the pool. Typically, it is around 4 hours.

Testing the pool water is essential.

The water may look crystal clear, but it may have harsh chemical levels. You should test it before immersing yourself in it. The chlorine reading should be from 1 to 3 ppm. The pH level should be between 7.2 and 7.6. Testing kits are available at your pool supplies dealer. Do not find out unsuitable water chemistry the hard way. You know there is too much chlorine or the pH level is too high when you suffer from skin irritation or burning eyes sensation. Testing should be done regularly. When the water chemistry test shows unsuitable conditions, adjust the chemistry accordingly.

Regular water treatment is part of maintenance.

Proper treatment follows a systematic process that involves balancing the chemistry, shock treatment, algae control, and disinfection. Of course, what follows is testing. Considering all these treatment procedures ensures the safety of the water.

Water pH level

It has already been mentioned above that the pH level should be from 7.2 to 7.6. This range is slightly alkaline, but it is the most suitable pH range. Anything above that is too alkaline for the human skin, while anything below is too acidic. When the pH level goes above 7.6, there is a risk of eye and skin irritation. At the same time, chlorine does not work well at a high pH level. When the liquid’s pH goes below 7.2, that could produce unpleasant smells due to possible bacterial growth.

Adjusting the pH level is possible, through the addition of either acidic or alkaline compounds. Acidic water can be neutralized by addition of sodium carbonate. High pH liquid can be corrected by the addition of muriatic acid. Do not add large amounts of acid or alkaline at once. Instead, do the correction gradually, by adding small amounts of chemical each time, and then testing the liquid after.


Chlorine is essential in keeping your pool water microorganism free. Its main function is as a disinfectant or sterilizer. Chlorine may be in the pure gaseous form that is released to the liquid via filtration systems, or, it could be introduced in the form of sodium hypochlorite or calcium hypochlorite. Both methods yield hypochlorous acid, which kills bacteria and algae. The introduction of chlorine should be done once a week. As you know, chlorine does not stay too long in the water. It reacts with other compounds. At the same time, it is recommended to chlorinate the facility in the evening, because the radiation from the sun destroys chlorine.

Source: Free Guest Posting Articles from ArticlesFactory.com

  Article "tagged" as:

About Article Author

Cedric Loiselle
Cedric Loiselle

For more information about pool supplies and above ground swimming pools visit our website mypoolspot.com.

View More Articles