DIY Door Closer Repair Tips

A door closer just does what its name suggests; it closes a door automatically. Most of the people who go to commercial buildings do not pay much attention to the type of hardware installed above their heads. Door closers are mostly at the entrance and exit doors, kitchen, fire doors, and services. People also use them on the doors of the restroom. There are several types of door closers and they all have their unique functionalities. Today, we are going to discuss how you can repair the hydraulic door closer yourself.

There are many companies providing door closer repair in Dallas TX that you can hire in exchange for your hard-earned money. However, with slight concentration, you can also do it yourself. Damaged closer can cause awkward noise and sometimes it does not close the door by itself as well. If your hydraulic closer stops working, then it would require an extra force to open the door as well.

Needed Tools

Here is the list of some of the tools, which you need to repair your hydraulic door closer by yourself:

• Grease
• Rust remover
• Adjustable wrench
• Grease gun
• Screwdriver
• Pliers

When you have these tools and materials, you are ready to do minor repairs by following the steps mentioned below.

Step1: Check the Hydraulic Arm

The first thing that can go worn on the closer is its control arm. It can bend if you have a top mounted unit. Its straight units can also get rusty and do not hold the vacuum any longer. You would have to check the arm and see if it moves freely or not.

If it does move freely, then check the air pressure screw. If the arm is frozen, the cause can be that the pressure screw is too tight or it lacks lubrication. There is also a chance that another solid object might be weakening its movement. Now, if the arm is rusty, apply some lubricant. In some types of door closers, you would have to use the grease gun to add lube.

Step 2 - Check the Air Pressure Release Valve

There is a tiny screw located at the back of the door closer to adjust the amount of released air pressure. You should adjust this a little. If by doing this, the arm does not move, then it may have seized up and will need replacement. You can get this from any store that sells equipment and parts for residential and commercial lock repair in Dallas TX.

Sometimes, prolonged exposure to outside elements causes the door closer to freeze up. In that case, you would have to apply the rust remover first and then apply the lubrication.

Step 3 - Check the Arm for Snags or Hitches

Take a closer and thorough look at the closer and make sure that there is nothing obstructing the movement of the unit. You can remove the unit from the door and check all the parts if they are moving freely. If the removal of rust and lubrication does not work, then it is likely that it sustains damage from the inside. For that, you can get the services of any professional company offering services, such as residential closer repairs, or commercial lock installation.

When Should You Opt for the Professional Door Closer Repair in Dallas TX?

If at any point, you think that it is very difficult for you to do the repair, it is advisable that you hire an experienced professional who can handle the high-security lock installation. If a technician lacks confidence, then he or she will probably damage the door closer even more. Therefore, choose your helper wisely. If there is a problem with the device, do not delay things. Call for help now!