Tips In Creating LED Display Panels Which Respond To Music

Apr 30
08:41

2013

randolph summitt

randolph summitt

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

In this digital age, it is actually possible for people to create their own disco party room. With cost-effective items that he can find, he can defin...

mediaimage
In this digital age,Tips In Creating LED Display Panels Which Respond To Music  Articles it is actually possible for people to create their own disco party room. With cost-effective items that he can find, he can definitely create those LED display panels that easily respond to music. Such a handmade product is sure to be a big hit to his friends and family members who are participating in the party he is hosting. He will need materials to make this. The materials necessary for the said project are the large bread boards, transistors, LEDs of the color he needs, plain picture frames, female audio jacks, and power adapter. He will also be needing an electrical tape, soldering iron, tin foil, solder, audio splitter, hot glue gun with glue, multimeter, screws, drill bit, and power drill. The first thing that he has to select is the picture frame. He should select three pieces of identical picture frames. This should allow the bread board to fit in nicely into the inside edges of the said frames. He should then make sure that he can stack it up nicely. This will serve as the housing for his light circuit. It is very important for the person to decide on the type of the adapter that he should consider. Most of the times, the person can make use of an old cellphone adapter. He should cut the plug off and strip the wire. Be sure to leave just enough wire on the plug to be able to use it again for another purpose in the future. Make sure that the end of the wire are twisted. The wire should then be soldered so that he can coat them with lead. This makes it easier for one to plug this wire into the breadboard. He should remember which wire strand is the positive strand since wrong configurations can cause the entire item to be damaged. Just like how he soldered the wire, it will also help him a lot if he can solder the audio jack. This is his first step to creating the circuit. It is also a given that he makes use of simple circuits on the board. He should then remember to arrange the colored LEDs properly so that he can get the results he desired. The case will have to be created next. The case is usually created with the use of the picture frame. Take charge of the tinfoil as well. The tinfoil is a really important material for this kind of project. This is the only tool that can easily reflect light in an easy manner. The person should then remember to drill the first hole. The board should be placed on top of this framed tinfoil. The person will have to place the board on the top of the framed tinfoil. He should be careful when gluing or screwing the frame. He should then double check everything to avoid cracking the frames. He should determine whether it is better to make the frame bigger. He might also want to see whether he can get the lights to be turned on properly. This should make it easy to take care of the LED display panels.

Also From This Author