Reasons Why Your Car Refuses to Go in Reverse

Jan 21
06:12

2020

Nancy Whitman

Nancy Whitman

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

You are always struggling to put your car in reverse. No matter how hard you are trying. It is a struggle and a fight to get it done. If this sounds familiar, this might mean that there is something wrong with your transmission. Or, there is a fault on your engine that is causing your car to refuse to go into reverse.

mediaimage

As any respected mechanic will tell you,Reasons Why Your Car Refuses to Go in Reverse Articles the thing is that there are many reasons why this does happen. And, you need to make sure that you know why your car won’t go in reverse. This is the only way that you can repair your vehicle if you know what is wrong in the first place. These are some of the causes of a vehicle that won’t go in reverse.

Lack of transmission lubricant

According to car mechanics, another reason why the car might not want to go into reverse is because of a lack of transmission lubricant. There are people out there that never have looked at their transmission lubricant levels in the vehicles, and when they are struggling with putting their vehicles in reverse, they don't understand why.

This is a simple problem that can be fixed easily. However, if you don't check this fluid on a regular basis, this can cause serious damage to your transmission.

Defective Shifter Device (manual vehicles)

As any auto mechanic will readily admit, the third reason why your car might not go in reverse is because of a defective shifter device. This is a problem that is more for manual vehicles than for automatic vehicles.

But, this is a simple problem that can be fixed easily without spending too much money on repairs. Yes, it might not be really cheap, but it won't be as expensive as replacing the whole transmission.  The sooner you are acting on the problem, the less damage you will have.

Worn-out tusks on reverse gear

Having worn-out tusks on your reverse gear is a bigger problem than any of the previous problems that we have mentioned. This is because you will need to replace the whole gear if there are teeth missing.

This is also one of the hardest faults to find on a transmission. This is because you need to take the engine apart to find this problem. Even if this is a serious problem and fault on your vehicle, this is still repairable without replacing your whole transmission. This is a job that takes some time, because of the work that needs to be done to remove the transmission.

Transmission might start to fail

If everything else is fine, then there is just one thing left. Your whole transmission might start to fail. Your worst nightmare. If your transmission starts to fail, you will need to replace the whole transmission. And, this is going to be really expensive.

And, whether you own a commercial or private vehicle, you will not be able to drive until your car is completely repaired. This is also the most expensive repair that you will do with a transmission repair, or with a reverse repair. It takes a couple of days to get this repair, and you will need to hire an expert to repair this problem correctly.

It can be frustrating when your car won't go into reverse. It doesn't matter if you have an automatic car or a manual car. The problem stays the same. If this is happening to you, you will need to make sure that you know where to start looking for faults. These are the common faults that you might have when you are struggling to put your car in reverse. Some aren't expensive problems, while others might be really expensive. But, the sooner you are getting the problem repaired, the better. To help ensure that your vehicle doesn’t encounter these issues, always look to have regular logbook servicing by a trade certified mechanic.