A Brief Overview Of Three Common Type Of Water Treatment Solutions

Aug 2
12:43

2017

Abraham Smith

Abraham Smith

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Water plays a vital role in our individual and professional lives and it is rightly said that humans can't survive a day without water.

mediaimage

Same holds true for a large number of industries too which are dependable on water for carrying out their production process. Manufacturers and others in industrial sector have to buy water at high prices,A Brief Overview Of Three Common Type Of Water Treatment Solutions Articles but with the help of various industrial Water Treatment Solutions, this important natural resource can be made much more affordable. This article discusses about some important type of water treatment solutions that are beneficial in varied ways to manufacturing sector. Read on to know more about them.

Cooling Water Treatment Solutions: Effective cooling water treatment solution can extend the life of your costly assets by maximizing heat exchanger performance. Corrosion, deposition, fouling and biological growth can hamper the progress of your operations as impurities that are left behind after evaporation concentrate over time. As the concentration increases, crystals are formed on the heat transfer surface causing reduced efficiency of the equipment. To prevent corrosion and scaling, you can hire the services of an expert water treatment company that will custom build a program to improve efficiency and reduce waste resulting in more savings.

Boiler Water Treatment Solutions: If you are familiar with how boilers work, you must be aware of the tremendous pressure under which they perform their job. Boilers heat water and convert it to steam, resulting in its expansion nearly 1000 times in volume. The converted steam travels down through steam pipes at speed in excess of 100 kmph. As steam leaves the boiler, the impurities are left behind which concentrate on the surface over time. The concentration of impurities increase with more steam leaving the boiler. It is a normal process in which every boiler works and there will be concentration of impurities every time a boiler will release steam through steam pipes. Various pre-water treatment systems will be required from time to time if manufacturers intend to improve efficiency of boilers and prevent the formation of crystals on heat transfer surface, also known as scaling or fouling. One boiler water treatment cannot work the same way for all boilers and it depends on boiler type and make-up water requirements which will determine the type of boiler water treatment suitable to meet your needs and requirements.

Wastewater Treatment: Wastewater treatment is perhaps one of the most sought after Water Treatment Solutions by manufacturers and industries across all sectors. Regulatory authorities have tightened their grip on industries who discharge wastewater as removal of contaminants from water through dewatering before discharging it has assumed greater significance than ever before. Wastewater usually contains oil, suspended solids and particles, organics, metal, chemicals, and sometimes the combination of all of these. Several steps are taken to remove aforementioned contaminants such as equalization, solid removal, secondary treatment phase, followed by a tertiary treatment phase.

Conclusion: Above three water treatment solutions are three common type of water treatment solutions offered by a reputed water treatment company that uses high-quality products and well-trained professionals to offer cost-effective and reliable water treatment solutions.