How A Well Pump Howard County Can Help With Your Well Water Needs

Nov 25
07:26

2011

Gardner Wilkinson

Gardner Wilkinson

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

If you are looking for a well pump Howard County company to help you out with your water needs then there are few things that you should first consider.

mediaimage
If you are looking for a well pump Howard County company to help you out with your water needs,How A Well Pump Howard County Can Help With Your Well Water Needs Articles then there are few things that you should first consider.  First of all, know that there are a couple of different well pumps available for you to use.  While all well pumps are meant to get water out of a well (kind of self explanatory), they usually do it in a number of different ways.  The two types of pumps that will be explained today are that of the jet pump and also the submersible pump.

One great option for a well pump Howard County is that of the jet pump.  These cool little pumps are great because they come in a few different sizes.  You will obviously want to consider the depth and capacity of your well before going out and making any purchases, and the jet pump allows you to customize a pump for the job at hand.  There are deep jet pumps that can go as low as 150 feet and then there are shallow jet pumps for more standard depths of around 25 feet.  The way that shallow jet pumps work is actually quite interesting.  They create an imbalance in the surrounding air pressure and are then able to suck up the water.  To begin, the pump must be primed and this is done by completely filling it with water.   From there, it will be able to take the water and force it down the pressure pipe.  It is then sent through differing nozzles and through a Venturi tube.  This whole process creates a vacuum of sorts so that the storage tank can be filled with the water.

Next on the list of well pump Howard County candidates is that of the submersible pump.  These pumps are a bit different than the jet pumps in that they actually move the water by pushing it, rather than sucking it up.  These take a bit more time and effort when installing since they have to be put under water.  These pumps have a water tight casing that goes over the engine so that it can do its job using electricity.  Depending on how deep your well actually is, you may need to install your submersible pump hundreds of feet down into the water.