Procedure to Paint a Bathroom Cabinet

There have been many people who have been strongly making the use of the cabinets in their bathroom and this trend is getting enormously famous and known in today world. The appearance of the cabinets in the bathrooms gives a much innovative and royal image to the bathroom. But on the other phase of the story there are many people that are always in the passion of changing the picture of their bathroom by making the use diverse styles and colors. Although making a cabinet in the bathroom would definitely be an expensive task therefore many people go for the preference of painting the cabinets. For all such people who have not been aware from this concept they must read this article because we are highlighting the most prominent and simple method for painting the bathroom cabinets quiet easily. For painting the bathroom cabinets you will need soap, vacuum, towel or cloth, screwdriver, plastic tape, paint brush and sanding materials.

Firstly remove out the cabinet with the drawers and fixtures and clean it properly. Just keep in mind the places where the wood has been hugely damaged. If in case the bathroom has bee suffering the pipe leakage then just clean the wood fully before it gets rusted. Juts cover the cabinet with the plastic sheet and uninstall all the nuts and screws and don’t forget to place them together because you have to use them all in the concluding step. Now take the cabinet at such place where the surface has been free from water. Take the vacuum for cleaning the debris and take the wood filling material for filling damaged wooden gaps. Now take the brush and mix the sand solution in it. Now roll down the brush on the cabinet. If you are thinking to make the choice of the second coating of primer then just continue when solution gets dry. Moreover, it is much vital to use the roller brush instead of the pint brush for the solution application.

Now take a cloth and put few drops of sand stones solution on it. Now apply this solution on the cabinet and make sure that the solution must get dry properly before heading towards the second coating stage. After it take the metallic spray and give a refreshing image to the bathroom cabinet in well manageable manner. If you feel that the cabinets are still left with less dirtiness then take an adhesive paper and roll it inside the cabinet’s fixtures. This paper will get stick inside the cabinets and save the cabinet from getting damaged. Now when it gets dry after 24 hours just reinstall all the screws and nuts once again and be careful that no single nut should get misplace otherwise the whole cabinet will get ruined. Well in this way now you are all set to make your bathroom cabinet looks alluring and attractive once more time. We are sure that you would clearly understand all the steps and procedure. So just go now and start gathering all the ingredients.