The Displayport cable connectivity solutions

Because many of my friends for using Displaypor to HDMI cable to the computer, HDMI cable manufacturers HDMIcabler Technology writing this article to answer, in order to solve tha problems encountered.Displayport to HDMI cable to connect the computer and the TV side settings:First the computer and the TV connected with HDMI line.Note that the TV is plugged into the interface name (as shown in the interface HDMI3)Turn on the TV, set the TV signal source into the interface HDMI cabler line inserted.On the remote control, press the 'source' of different brands the name of the TV is not the same, but the setting is the same way.)On TV, mobile options, select the "HDMI3TV settings are correct, and then set up your computerPC settingsDue to the user-installed operating system is not consistent,To explain the video and audio settings.Windows 7 System SettingsThe following is an example of a large number of users Windows 7 and windows XP operating system.Video settingsWin  System external display will have the following four video display modeCopy: computer display screen and screen display is the same as for educational. Main product: HDMI Cable is with good quality. Expansion: TV screen is a computer display screen expansion content, suitable for both display the same contentShow Desktop: refers to the screen only 1 display significant WoOnly 2 on the desktop: refers to the screen only 2 of the display on the displayWhere 'copy' and 'Extended refuse was more widely used.The following graphic demonstrates operation1 and 2 of the right screen resolution (window on the desktop computer monitors and TV icon)Screen resolution multi-monitor window, select the desired display mode notebook user can press the Fn 11 ", the following screen, select the required display mode, the desktop can be displayed on the TV.NOTE: different computer video switching key combination different instructions can be found in the notebookAudio articlesOpen the Control Panel Hardware and Sound Sound. Figure there are corresponding audio output optionsGeneral system default on your computer's speaker J audio output, select the graphics side of the audio output deviceThe right-select "Set as Default Device"Note: Here is the the NV IDIA Day IgH Definition Audio IN the small ER graphics chip audio and ATI graphics chip audio set Same here, not one by one to explain.)Then it will play a sound on the audio output device (provided that you want to play music or movies, oh}) Some models need to restart the computer to normal playback sound