Use Pressed Concrete For Its Incredible Durability

Molded concrete items are well-known to most people. However, pressed concrete can often be a very unfamiliar term, which many people do not know. In fact, this refers to molded items which have been subjected to very high pressure in the mold. The result is products which are very dense and also incredibly strong by comparison with ordinary items.

These attributes are quite different from products which have not been subjected to the same sort of pressure, which are often dismally weak. The pressed product is very consistent in its strength; ideal attributes for certain applications, especially with the addition of reinforcing wire to the mold before pressing. While the process is not very different, the results are almost magical.

The pressing process compacts the material as well as removes excess water, with the result that these item have very low porosity. This makes the for ideal roof tiles as they will not absorb much water and lichens are less likely to grow on them. They will usually not require sealing and will give years of trouble-free service, with a resulting cost advantage over their useful life..

An search on the Internet will yield many results for stamped concrete, which is not at all the same. Here the mix is cast in place and then impressed with various designs. This approach has certain advantages and is currently enjoying great popularity. However it does not enjoy the strength and low absorption associated with pressing in the mold.

Much the same variety of pigments can be used as for any concrete product, and different finishes are also available. Both of these elements can be combined to enhance the appearance. Where the the products are specified to comply with Green standards, colors will fade as natural pigments will be used. Staining may not be as effective either, due to reduced porosity.

This material is preferred in the manufacture of a paver per or pedestal, as the end product has the necessary strength to fulfil the requirements. Such reinforced areas are vital for parts of walkways where high traffic or other heavy loads are anticipated. Roofs made using paver piers are very strong and have certain other benefits, such as improved circulation of air as well.

The benefits of strength and low porosity enjoyed by these products means that they are routinely used in commercial and multi-storey construction. It would seem that the reduced costs of maintenance would also make them suitable for normal residential development. Any slight increase in initial costs would be more than offset by lower costs over the expected lifetime of the building, easily justifying their use.

For those who might be unfamiliar with all the advantages of pressed concrete products, it would be wise to investigate these useful products further. The availability of Green certification for them is a further advantage. Many modern developments emphasize this aspect because of the reduced toxicity and environmental impact. All the advantages inherent in this material outweigh whatever minimal disadvantages their might be.