What To Do When The Garage Door Has Broken Springs On The Track

A disturbing sound can emit from a garage when someone is trying to open it. They might hear a loud snapping sound and suddenly find themselves without a vehicle that they can use to get to work or do some errands. What can happen is that age and wear and tear has finally caught up with the mechanical device that assists in gaining access to the inside and now they have to deal with broken springs that will need to be replaced.

On many structures, these doors were built out of solid wood and are very large. They can easily weigh into the hundreds of pounds and lifting them without help can be extremely difficult, if not impossible. The springs are what helps pull the wood up and makes it so it can be dropped down safely.

Obviously, if the springs have snapped and are no longer in one piece, then they will have to be replaced. The pressure put on the system will prevent any other types of repair from being effective. This may seem like an easy job at first when one glances over things, and those who like to do things themselves may be tempted to tackle the job. However, things can be deceiving and it might not be that easy once they get started.

Most of the door units are built using either a torsion or an extension system. Each serves the same purpose of opening and closing the garage, but they are very different in design. The extension is simplistic in design and many people might be able to repair these on their own. The torsion system is more complicated and may require special tools and knowledge.

In the torsion system one must be very exact when measuring the replacement springs. They should not be too long or too short if they are to work properly. These can also be dangerous to install. There are some stores who will not sell these items to someone unless they are an experienced professional who knows what they are doing.

Another element one may want to consider is that they may have to obtain a special tool to do the job. This could mean that they are going out and buying something that they may only use once in their lifetime. There may be a chance one can rent the tool, but they may have to spend a lot a time searching for someone who supplies them on a rental basis.

Once the items are installed, then a person has to make sure that everything is balanced correctly. This can also be a difficult task for the amateur to do well. The door will have problems opening and closing if this is not done right.

On a morning when one wakes up and finds they can no longer lift their garage door, they may be suddenly facing a rather difficult repair job. Over time everything ages and wears down and this can lead to having broken springs that need to be replaced. There are some people who may attempt to do this on their own. However, they should think it through before they start this type of project. Sometimes, hiring a professionally may be the best decision.