Free Articles, Free Web Content, Reprint Articles
Thursday, July 9, 2020
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles

Working of Septic Tank and When to Empty Them

Septic tank cleaning near me is more important than you can imagine. The number of people residing in the house, the more the tank requires frequent cleaning. For proper functioning, it should be cleaned after two to three years.

With a hectic schedule in everyone’s lives, one can easily forget cleaning their septic tank. Here you will get to know everything about septic tank cleaning near me with the intention of expanding your thoughts to see the bigger picture.

Importance of Septic Tank Cleaning

Not cleaning the tank for a long time attracts the growth of algae and other unpleasant fungi. If the water is there for long, it will emit a bad odor. The algae produce silt, and the bacteria can turn into toxic. If the problem is not detected soon, there will be costly repairs or replacement. Cleaning of the system helps to protect your family, preserves the environment and promote health.

Working of Septic Tank

After the waste enters into the septic tank, it is divided into three levels, namely: Solid that forms sludge and settle at the bottom of the tank, water forms the middle layer, and the oil forms a scum layer at the top. The liquid layer has the highest percentage of the waste, and with time, it gradually affects the tank’s performance. The sludge is left to decompose, and at a point, the best bacteria also unable to break it down, and the solids will start building up and take the tank’s space.

Step by Step Procedure for Tank Cleaning

Collecting Equipment

You need to have the right equipment and tools to clean, and they are mentioned below:

Baking soda

Chlorine tablet

Laundry detergent


Safety glasses

Protective rubber glove

Power washer

Bristle brush

Water in a bucket

Locating the Septic Tank

You have to find the exact location by starting from the sewer pipe to the direction the pipe takes to exit the house.

Digging for Reaching the Top of the Tank

The tank is buried underground, and you have to remove the dirt on top of it by using a shovel. As a cover, the tank has a tight port lid. Inspect it to make sure there are no cracks as they obstruct proper pumping. Test by flushing your toilet and check whether the wastewater making it to the tank or not. If you see any cracks, call a professional to repair them.

Waste Pumping

When everything is in the right condition, pull up the tank’s rid and put it aside. Now the waste needs to be pumped and directed towards the pumping truck. This method breaks up the scum and sludge, and the solids will be eliminated. The professionals must inspect the baffles to ensure that none is damaged.

Baffle Cleaning

After completion of pumping, only a small amount of liquid and a black film in the wall are visible. By wearing protective gloves, the cleaner must reach into the baffle using his hands, a rake, and a hoe. Then he pulls out the filter. For rinsing the filter, the cleaner holds it over the septic tank inlet side and spray it using a hosepipe or dip in hot water until all solids come out. FinallyHealth Fitness Articles, the tank gets cleaned.

Article Tags: Septic Tank

Source: Free Articles from


DraneRanger provides various liquid waste management solutions such as grease and lint trap cleaning, lift station and wet well cleaning, septic tank cleaning and maintenance, and vacuum truck services in Houston, Pearland, Alvin, and Sugar Land. To more know, visit

Home Repair
Home Business
Self Help

Page loaded in 0.187 seconds