Cisco CCNA And CCNP Practice Questions: Static Routing, EIGRP, And More!
Let's test your knowledge of static routes, EIGRP, wildcard masks, and other important Cisco exam topics! CCENT Certification: What command creates a default static route that uses the local r...
Let's test your knowledge of static routes, EIGRP, wildcard masks, and other important Cisco exam topics!
What command creates a default static route that uses the local router's serial0 interface as the exit interface?
Answer: ip route 0.0.0.0 0.0.0.0 serial0
Which of the following wildcard masks or words would be used in an ACL line that should match one and only one IP address?
Answer: B, C. A wildcard mask of 0.0.0.0 has the same effect as the word "host". Any line with either one of those values will match only the particular IP address named in the line.
CCNP Certification / BSCI Exam:
Short answer: By default, what percentage of an interface's bandwidth can EIGRP use?
Answer: By default, EIGRP can use up to 50% of an interface's bandwidth.
CCNP Certification / BCMSN Exam:
Short answer: At what layer of the Cisco three-layer model should a network's root bridges be found?
Answer: The Core layer.
CCNP Certification / ISCW Exam:
Short answer: What is the minimum length of a Cisco router password?
Answer: One character. It's the minimum length, but not a recommended length. ;)
CCNP Certification / ONT Exam:
Which of the following are best to use when optimizing video tranmission flows?
B. TCP Header Compression
D. RTP Header Compression
Look for more Cisco certification exam questions on this website!
Source: Free Articles from ArticlesFactory.com
ABOUT THE AUTHOR
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage (http://www.thebryantadvantage.com ), home of free CCNA and CCNP tutorials, and The Ultimate CCNA and CCNP Study Packages.
For free daily CCNA, CCNP, CCENT, and Microsoft Server 2008 and Vista certification questions, just visit the website and sign up for the daily newsletter or visit the site blog!