Repairing Of Iphone Speaker

Experts of iphonerepair specialists service thousands of apple devices each year for individuals, companies and major dealer groups nationwide. Experts has established itself as the leader in the iphonetouch repair industry through our dedication to customer service, high quality repair fastest turn around and experienced advice. Experts are well established companies provide good job. They are professional and many highly experienced technicians, operating from dedicated workshops. Repairing of iphone, place your iphoneon a clean flat surface. Repairing of iphone2g speaker, remove the simcard slot using a paper clip. The best entry point for the safe opening tool is the gap above the dock connector as shown in image. Slide the safe open tool towards the edge and slightly twist it to widen the gap. The previous step will create a gap on the side of the dock connector. You will have to apply a little force to insert the plastic prying tool here.

Slide the tool towards and around the edge of the first generation iphone. Slide it all the way up to the iphoneback plate. Repeat the procedure on the other side of the dock connectors. Now you can lift up the iphoneantenna cover with your fingers and pull. After the antenna cover has been removed, you will notice two screws on the sides holding the back plate in place and one screw in the centerconnecting the antenna ground and the iphoneback plate. Remove the three screws using the Phillips screwdriver. Push a flathead under the small aluminumhook extending from the back plate; try to lift the hook itself as little as possible as they are breahable. The goal is to expert the prying force on the reinforced part of the back plate that is located by the hook, not on the hook itself. Repeat the procedure on the bottom and then go back to the top. In this way you can open your iphone2g success fully.

Take the main board, remove the black tape using a flat head and be carefullyremoving it because you want preservethe piece for later during re assembly. Try not to tear the tape like you see in this picture. We are showing you this here for demonstrationalpurpose and we have sample tapeto replace it with. Use a very fine flat head or a dentist tool if you have one to release the hooks that hold this piece of metal in over the ear speaker. The amount of space to work with is small to release the metal hooks but slowly work your way between the edges. You have now made it to the ear speaker. This piece is held in by double sided tape so just wedge you flathead into a side of the ear speaker and wedge it out of the phone. As you left the ear speaker out you will feel the double sided tape slowly giving. Now you can remove the ear speaker and replace it with a working one.