Free Articles, Free Web Content, Reprint Articles
Saturday, September 19, 2020
Free Articles, Free Web Content, Reprint ArticlesRegisterAll CategoriesTop AuthorsSubmit Article (Article Submission)ContactSubscribe Free Articles, Free Web Content, Reprint Articles

About schemes and radio control helicopter circuits

Get to know about tips and generalities to manage the circuit box wiring of every radio control helicopter. You need to master this data or else you will fail in many ways.

A general radio control helicopter scheme of power and data can give you a basic idea. A good option to consider when wiring the control module, which includes not only the potentiometer knobs but also serve to reverse the same and some additional potentiometers allow us to regulate the sensitivity to the issue that need it.

The circuit could be the following:

§  Wiring a channel regulation (Trim), independent of the encoder.

§  This circuit can be repeated for each transmission channel, notice that we will have a double key and key investor sensitivity on / off for each channel, plus a small trim potentiometer for mail and another to adjust the sensitivity or rank to the main control potentiometer. For this reason it is advisable to consider these gun controls when the radio control helicopter transmitter box.

When it comes to values of each component, it depends on the encoder circuit that we used, so do not let them scored, the resistance does not vary much may be the boundary, which can range between 1K and 5K, the trim pot.

If we put a 100K trim pot will be very sensitive, and if we put a 5K range we may be missing because the trim pot is not enough to correct. The resistance associated with the Trim Pot can be 22K to 47K in either case.

The sensitivity adjustment of the radio control helicopter potentiometer or range helps us if we have less travel in the servos for the same route of the joystick, as the resistance decreases sensitivity pot pot control sensitivity decreases. It is recommended that this pot is approx double or triple the value of the main control potentiometer.

In either case, these are not standard value, it is best to find them in practice. The circuit design theory suggests that it works, but in practice is where we will see that we make adjustments. The LED voltmeter bar is an important item, too. Take a look at every design and get going. You can discover a grandiose world. This can bring many benefits to help you master new techniques. It is linked to a process that saves the current state of the running program and jump to a special address of program memory.

Code is executed to interrupt care, this is the "conscious" of the process because it is where shares are held the attention of the interruption and the programmer plays a role. When the interrupt service subroutine executes the return statementFind Article, it triggers the process of restoring the radio control helicopter processor to the state it was before the attention to the interruption.

Source: Free Articles from


DinoDirect China Limited ( is one of the biggest global online  retailers. It offers a great quantity of products with competitive price by cutting the middleman and offering products directly to the terminal consumers. possesses a great many software products with proprietary intellectual property rights, owns technological superiority and an efficient marketing team among the similar industry.

Home Repair
Home Business
Self Help

Page loaded in 0.106 seconds