There are myriad of flooring options available these days. Right from
different types of tiles like ceramic, vinyl, terracotta, etc. to wooden
and carpet flooring; one has simply a lot of choice to choose from.
Among the different options, carpet and tiles are equally favored by
people and hence, both of these flooring types are used simultaneously
Naturally there are places where you will be required to make the
carpet to tile transition. Here we will take a look at the different
Transition Between Tile & Carpet
There are several methods that help in making the tile carpet
transition. The actual transition material used depends on the type and
material of the carpet as well as that of the tile. You have many
options, in case the height of the carpet and the tile are the same. On
the other hand, if they are different, you need to make use of only
specified types of transition material. If you are wondering how to
carpet tile transition, then you can take a look at the following easy
methods and follow them at home.
'T' strip or the Transition Strip: This is one of
the most commonly used types of tile and carpet transitions. In this,
the vertical part of the 'T' goes in between the carpet and the tile.
The top overlays both the pieces. This transition is usually used in
high traffic areas, where one needs to avoid the tile edge from getting
Brass Trim: Brass and aluminum strips are also
commonly used for carpet to tile transition in case of ceramic or other
glazed tile designs. This is also one of the best options in case you
want a seamless tile to carpet transition or transition between any two
types of flooring. The trim has a slope in order to carry out the
above mentioned function, and is easy to install. One of the other
advantages of the brass trim is that they are available in a variety of
Bullnose Trim: In case you have a tile that is
higher than the carpet, then you can go for the bullnose trim. This
trim has a rounded shape and is helpful in a high traffic area.
Chamfer Trim: The chamfer trim is another type of
edging used in case of a higher tile. It is similar to the above
mentioned type of transition; but differs in shape. The chamfer
transition has a 45 degree angle which helps in covering up the
difference in between the two flooring types.
Vinyl Strips: Apart from the above mentioned
methods, one of the lesser known method is using vinyl strip for carpet
to tile transition. Vinyl is one of the most durable materials of
transition available today and hence, these strips can be used in any
part of the house. One of the other advantages of using the vinyl strip
is that they are available in a variety if colors and patterns, and
hence, you will surely find something that perfectly matches your tile
and carpet patterns.
Natural Transition: Lastly, if you wish to have a
natural transition, then you can either cut or sand the edges of the
tiles to make it smooth, with rounded edges. This is usually done if
the tile is only slightly higher than the carpet.
These are some of the ideas on carpet to tile transition that you
can go for. Nearly all the above mentioned material is easily available
in most of the parts of the world. You can research in the market or
check on the Internet to get the best stuff. Good luck!