A dream house or apartment construction involves taking care of many factors in order to ensure a beautiful final outcome. Along with building blocks, cementing and flooring, which are important requirements for making a reliable base for the structure, embedding the buildings with appropriate tiles is also necessary to enhance the aesthetics of the interiors of a house, flat and the like.
Long gone are the days when the days when the installation of tiles was just limited to washrooms and kitchenette. Owing to the creative and dazzling designs of the contemporary tiles, they can now be used in any room of any kind of building for either functional purposes or just for beautifying the entire look of that room.
This increased usage of tiles in the commercial as well as residential structures has forced the builders to modify the way the tiles were installed earlier. Traditionally, it was believed that the structure used for installing tiles could be similar to the ones for the hardwood, carpeted or resilient floors.
However, with the increase in size of both the tiles (like Simpolo tiles and Sunheart tiles) and the structure, any mistake in the design process can completely lead to a failed structure. Therefore, let’s have a look at some of the ways by which tile installation should take place.
Requirements for Tile Installation
1. Structural Requisites
Before the tile installation process is commenced, make sure that the surface, on which it is going to be installed, whether it’s going to be wall tiles or the floor tiles, is rigid enough. It is the foremost duty of the architect or the designer to make sure that the substrate is at par with the stiffness and deflection criteria. Since tiles are very rigid, they will not be able to handle any excessive load or usage if they are subjected to it. The other factors that you need to keep in mind are- how many people will use that area every day? How will be the areas used for? What of the number of people have increased afterward? All these factors when considered will ensure that your tiles do not encounter problems like cracks and dislocation.
2. Type of Substrate
Some of the most common types of flooring are cement backer units, glue plywood and concrete. Some of the other types of remodelers which you can also come across are existing resilient or tile flooring. Remember, tiles like Sunheart tiles and Simpolo tiles can be properly installed over existing flooring if proper precautions are undertaken while installing.
3. Preparation of The Surface
The surface should be devoid of any bond-inhibiting or bind-breaking materials like waxes, sealers, adhesives, paint, dirt, oils, grease, etc. If you come across any such substance, remove them with the help of mechanical abrasion process. Usage of chemicals or acid should be strictly avoided as they may damage the surface badly.
4. Grout Selection
Low-maintenance materials are the only requirements of the builders for installation areas like walls, countertop and floors. Grout selection is one of the hardest parts as it’s very difficult to maintain and keep clean. Therefore, epoxy-based and special cross-linking grouts are the best.
If you are on a lookout for getting tile installation done in your residence or in your office, then eConstructionMart is your one-stop-solution for all variants of tiles. Here you can get to choose from a wide variety of tiles like Sunheart Tiles, Simpolo Tiles, Wall Tiles and much more.