Surgical Instruments: How They Should Be Cleaned

Post Operative Care: Open the instrument by parting the rings or ratchet. Any surgeon who has cleaned medical instruments before will tell you know that you should never permit blood to dry on to these surgical instruments or forceps. If you dont allow blood to dry on the instruments, soak in an enzymatic solution or place a moist towel saturated with water over the instruments.

Cleaning medical Instructions: Do a standard decontamination method, followed by terminal sterilization procedures.

Tray Assembly Tips: Sterilize instrument with ratchets open.

All needle holder jaws will wear out the tread in regular suturing. Gold handle needle holder jaws are made of tungsten carbide and can be replaced. Standard needle holder jaws (The kind without the gold handles) cannot be replaced.

If any bioburden or discoloration is found on the jaw or box lock, the surgical instrument sets should be reprocessed thoroughly during the cleansing process. A new cleaning brush with stiff brussels more than likely should stay away the bioburden. If it's not clean, it can't be sterile. It is not suitable to clean instruments at the assembly table.

Jaw wear is an issue with all differnt types of needle holders. Diamond dusting is a method that enables the needle holder to grasp very fine suture needles. Most agitated metal surfaces do wear smooth over time. before.

Due to the pressure of stainless steel wire being twisted, its possible that the twisters are proned to cracking. This malfunction allows pieces of the tungsten carbide jaw to fall into the surgical instruments site. Inspect the jaws before to tray assembly and if pieces are missing or jaw wear is visible, do not use the instrument. Schedule the wire twister for repair.