Jack Bush

A Detailed Repair Manual on How to Fix A Xbox 360 Yourself

Are you looking for ways to fix your own Xbox 360 console? Here is a detailed manual for you.  Read the James Dean's Xbox 360 3 Red Light Fix Review for more...

Are you looking for ways to fix your own Xbox 360 console? Here is a detailed manual for you. You will learn in this article: what to do immediately after freezes, how to cool down you over-heated console, how to fix the three red lights problem.

First of all, you need to identify the problem with your Xbox 360 when encounter anything wrong. Check out the condition of the lights beside the power button. Error lights can be as cryptic as error codes. For example, 1 red light means you are having general hardware failure.

For hardware failure, you should first of all check the power supply with the gaming device switched on.

In order to do this you should first all turn off the Xbox 360 game console, unplug the power plug, just wait for some minutes and then turn on the gaming device again. Chances are that the red lights error would not occur.

But for the most time, things are not that easy. You may probably have three red lights, which is also called red ring of death. Don't be panic. Here you will learn how to fix Xbox 360 in that condition.

The three red lights is caused by over-heating. This is the main drawback of Xbox 360 which results from the design flaw of the console. So when fix your broken Xbox 360, you need to cool down your console as soon as possible. Let's what to do for that...

If you feel it is getting overheated then you need to keep it without functioning in open air so that the heat gets removed. Maybe it is too late already. Then you have to...

Firstly, remove the entire outer case. After this you need to remove the DVD drive and unplug the cable. In the same manner, you need to remove the fan and the motherboard and also the clamp that is under the heat sink.

Once you remove the heat sink you can see the GPU and CPU. You need to make sure that you keep these two free from dust. You then need to apply arctic silver thermal compound on the GPU that is easily available at any local store. After leaving this on for sometime, you need to put back the heat sink and other components in the same way you removed them.

These basic steps in the how to fix your Xbox 360 is most important and needs to be strictly followed. But if you are a novice to fix your own Xbox 360, you need some professional guide for you to do all these steps safely.

I highly recommend you James Dean Xbox 360 3 Red Light Fix. It provides you with ebooks as well as videos so that you can understand the whole process clearly enough. Here is a review of James Dean Xbox 360 3 Red Light Fix for your reference.

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR