Dave Sabot

Bleeding Your Cigar Lighter Before Refilling

Your cigar lighter is an integral part of the smoking process, whether you have a torch lighter, dual torch or another type of lighter.

However, lighter maintenance and troubleshooting should be part of your regular care regimen, in order to ensure that your lighter works properly every time. That said, some smokers are unaware of the importance of bleeding your lighter. Regularly bleeding your lighter will help ensure that your smoking experience is enjoyable.

Why does your lighter need to be bled? The bleeding process ensures that all old fuel and air within the fuel chamber are eliminated. This ensures that you have a smooth, even flame, without any fears of flares or sputtering. The bleeding process is simple and effective. Youll need only a single tool and a few safety steps to ensure your lighter is performing properly.

Invert your lighter, so that the bottom is facing up. Now, locate the filler nipple, through which you add fuel to the lighter. This will be a metal nozzle, located on the bottom of the lighter, usually within a circular flame adjuster. Once you have located the nozzle, insert a small screwdriver or a similar tool and depress the nozzle. You will hear a hiss as the gas begins to escape. As a note, you should keep the lighter away from your face and your ears during this process. You should also avoid doing this near any source of flame.

Hold the tool in place until the hissing sound stops. Remove the tool. Shake the lighter several times. Now, reinsert the tool and you will hear the hissing resume, though it will likely be lower in volume than before and will last for only a short time. Once the hissing stops for the second time, you can refill your lighter. To do this, simply keep the lighter inverted and use your filler canister to refill the lighter with fuel.

You should bleed your lighter whenever you notice that the fuel is becoming low. If your lighter does not have a means to check the fuel level, you will have to rely on the performance of the flame. Spitting or flaring are good signs that your lighter is nearing the empty mark and needs to be bled. Exercise care when bleeding and you will remain safe during this vital process.

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR