Enhance the life of your nitro radio control car

Before doing a run in on your radio control car, you must use silicone on gaps as well as around the electric box. Ensure that all the screws have been tightened up before and after each run as these may get loose. You may even lose these parts while you are running your car around a park or even the racing track.

You need to empty the fuel after using it for run in of the engine. This is because condensation can build up in the engine. This will damage it in case it is left for a long time. Next, you need to clean the wheels as well as ball joints. In fact, you need to clean your radio control car all over as a lot of dirt, sand as well as mud can build up. This will not take long. You need to keep the car clean as well as maintain it. This will keep it running in good condition. You will not have to spend any money in order to keep buying spare parts. Remember that using normal batteries in the controller is not good as they will run down pretty quick. Once the batteries go under 9V, you may even lose control of the radio control car and even crash it. You need to get good rechargeable batteries. Next, you need to always ensure that you have a full charge. This will also save a lot of money in the long run.

Once you break in a nitro radio control car, you will ensure that the car will not act strange and not run properly while you are using it. In the beginning the car will stall a lot, but this happens to nearly every new radio control car. You need to just keep with it. Just slightly adjust the tuning screw and your radio control car will become smooth and an easy ride.

 After you have used up a couple of tanks of fuel, you will have a strong, reliable running engine. After all, in case you own a radio control car then regular maintenance is a must.

You must always perform a visual inspection on your radio control car. Ensure that there are no cracks in the body or any other damage anywhere. Ensure that the tires are good. Also check to see if the rims are still glued well. Use paper towels or cloth in order to wipe your radio control car all over.