Make it Tonight! Glowing Glass Jar Party Lights

Sep 14
21:00

2004

Patricia A. Ziegler

Patricia A. Ziegler

  • Share this article on Facebook
  • Share this article on Twitter
  • Share this article on Linkedin

Let these festive glass jar party lights set a magical mood at your next outdoor ... They cost very little, last for years, and are so quick and easy to do, you'll want to make several, all

mediaimage

Let these festive glass jar party lights set a magical mood at your next outdoor gathering! They cost very little,Make it Tonight!  Glowing Glass Jar Party Lights Articles last for years, and are so quick and easy to do, you'll want to make several, all in different colors. Here's what you'll need for each:

  • empty glass jar
  • approximately 7 feet of 20-gauge copper or brass wire
  • short length of 22-gauge wire
  • electric drill
  • pliers
  • large cup hook with long shank
  • glass stain paints
  • short, fat candle
  • approx. 1/2 cup of sand
How to Do It:
  1. Loop the 7-foot length of 20-gauge wire into a circle. Hook the two ends together with pliers.
  2. Bend the wire circle in half with the join centered on one long end.
  3. Place the wire circle over the neck of the jar below the lip, with about three feet extending on either side, and the joined area up against the neck of the jar.
  4. Using the pliers, twist the left-hand loop tight against the neck of the jar.
  5. Insert the cup hook into the drill.
  6. Holding the wire firmly against the neck of the jar, slip the right-hand loop over the cup hook. Pulling the loop taut, run drill at its lowest speed. Allow the wire to twist tightly up to the neck of the jar.
  7. Repeat with left-hand loop.
  8. Bend the two twisted loops straight up above the jar. Take the piece of 22-gauge wire and tie the loops together about 4 inches from the ends.
  9. Use pliers to shape the 4-inch ends into coils, spirals or any interesting shape. See illustration.
Get Creative:After you've assembled several jars, hang them in a convenient spot and color them with the glass stain. You can paint each jar all one shade, or make it fancy with leading and any decorative design of your choosing. Just follow the manufacturer's instructions. When the glass stain has thoroughly dried, add about two inches of sand to each jar, and insert the candles. It's Party Time!You've hung your jars in their final party location. The sun has finally set! So strike a match, turn 'em on, and bask in the glow of your festive, flickering party lights!(NEVER LEAVE A BURNING CANDLE UNATTENDED!)For the illustrated version of this article, please visit http://www.pazpizzazz.com/jars.html.You may reprint this article freely if all links as well as the Author Bio are left intact. Thanks!