What Should You Do if You Find Your Xbox 360 No Picture But Sound?

You have probably had just experienced Xbox 360 no picture but sound problem and thus you are reading this article. You have found the right article to help you out of this trouble. In this article, we are going to find: What is the cause of this Xbox 360 audio but no video problem? Can you fix it easily? How can you fix it when Xbox 360 has no picture but sound?

First question: What is the cause of this Xbox 360 audio but no video problem?

Basically, the Xbox 360 no video problem is caused by a failure in the graphics processor system on your console.

When the graphics processor fails, your console is unable to display video. The cause of this issue is actually overheating. The excess level of heat causes loosening the "X" clamps, which hold the graphics processor unit in place. When these clamps become sufficiently loose, the graphics processor/video card stops working, hence your Xbox 360 audio no video.

Second question: Can you fix it easily?

It is definitely a fixable problem. And it can be fixed by yourself with some simple steps which will be introduced to you in the following paragraph.

Last question: How can you fix it when Xbox 360 has sound but no video?

Basically speaking, in order to repair your Xbox 360 you will have to open up your console, remove the motherboard, and then re-tighten the "X" clamps on the back of the motherboard so that the GPU is connected properly again.

In detail, when you find your Xbox 360 no picture but sound, you need to first try the following things:

1. Try to disconnect all the cables including the power cord and the audio video cable.2. Before you plug it back try also to wipe the prongs or the metal part of the cables to ensure it has no debris or anything that would mess up the connection. 3. If your using an HDTV make sure that the switch of your component cable is click on the HDTV settings. 4. If it still not working for you, try to use a different cable and TV just to isolate the problem.

If the issue still persist, you have to disassemble your Xbox 360 case and remove motherboard, which is mentioned above. You will need to take a bit of care with this process to avoid damaging anything, so even though it sounds quite simple.

To learn how to disassemble your Xbox 360 and remove the motherboard safely, you need to invest in an Xbox 360 repair guide. I highly recommend you of James Dean Xbox 360 3 Red Light Fix Guide.

It will show you the steps with ebooks and videos you need to take to fix the Xbox 360 no picture or sound error in much greater detail. Otherwise, you will likely find it slightly difficult to perform Xbox 360 surgery in practice. Go to James Dean Xbox 360 3 Red Light Fix Now!