Can't take the smokey smell, clutter and danger that real candles cause? You might be interested in making LED tealight candles at home. Read on to know how.
If you are like me, you would certainly despise the smokey scent of lighted wax candle lights whenever they obtain burned. You'll be concerned concerning the threat that candle fire could cause; particularly after the United States Fire Administration declared that more compared to 150,000 American homes obtain fire accidents each year.
To avoid jeopardizing your family's well-being along with your home investments, you want to switch over to safer alternatives such as LED tealight candles. Nevertheless, if money is an issue, you might want to consider making your own tealights also. To learn the best ways to make candle lights at home, keep reading.
What You Will Need
Before beginning on the steps on how to make candle lights, initially, you will certainly have to grab the following materials:
10mm LED light
Wire cutter
Wire ports
Needle-nose plier
Electric tape
Resistors (100 ohm & 220 ohm)
Battery (9 volts) and battery clip
How to Do it
To master the method on how to make candle lights, right here are the steps that should be satisfied:
1. Reduce the lead in resistors by either bending or trimming by means of a wire cutter. Remember the resistors' shades- the various hues should assist you identify 110-ohm from 220-ohm.
2. Attach the negative end of the battery clip to one resistor. Using a wire port, twist or coil the cables with each other as well as attract them in the direction of the port.
3. Using your needle nose plier, turn the ports securely. To make certain these stay in the right place, squash them continuously till you could not separate the cables effortlessly.
4. Press the LED's longer side to the resistors. Attach the lead of the short LED to the lead of the long LED.
5. Get the remaining cablesand link them to one another. Ensure that the positive lead is affixed to the battery clip as well as the unfavorable cables are hooked up to the LED.
6. Arrange the cables well and link them in a cluster using an electric tape. While doing so, make certain that LED is not covered with tape as well as the LED and battery connection are arranged in opposed instructions.
7. Place the 9V battery on the clip you have set up recently. Now, you are set to appreciate the soft, glowing light of your LED tealight candles. Place them inside a transparent or tinted glass or candle carrier; or simply utilize them as they are.
Since you have learned the best ways to make candle lights the easy way, there should be no excuse for you not to enhance the home each time a special occasion comes. However if you're not in the DIY mood today, you could acquire readymade LED tealight candles in Amazon.com(http://www.amazon.com/dp/B00GL37TFY). After a number of days, you should get your long lasting as well as nicely-made tealights right at your doorstep. Enjoy!
