One of the most embarrassing things that can happen while entertaining is discovering that you do not have enough seating available for guests. For the beginner, it may be wise to start with a simple, straight back, dinning style chair. These can be built fairly easily with tools most people have around anyway. The materials can range from economy to high dollar and the chair will turn out virtually the same.
One of the most embarrassing things that can happen while entertaining is discovering that you do not have enough seating available for guests. Whether you need a few extra chairs to pull out only when needed, or you desire a stylish and practical piece to add to your decor, you can find plans for chairs to accommodate. Chair plans can range from the very simple straight back chair with no arms, to a high back, decorative chair with arms, wheels, or even rockers.
For the beginner, it may be wise to start with a simple, straight back, dinning style chair. These can be built fairly easily with tools most people have around anyway. The materials can range from economy to high dollar and the chair will turn out virtually the same. They can be dressed up and made more comfortable with paint and cushions purchased from and dollar store or department store. The types of plans for chairs are usually straightforward and easy to follow. Diagrams tend to be simple because the plan is simple. This type of chair could be classified as a "beginner project."
For those who have a little more skill and access to a larger variety of tools, a more intricate design may be desirable. Consider finding plans for chairs that include arms, or more detail work on the back. The details will need to be sanded, and often hand sanding is the best way to go as it allows for more control and can help avoid sanding away details altogether. This type of chair often works well in a natural wood tone, as this allows the details to show up better. A nice shade of stain and varnish finishes the look. For a non-traditional look in a home office, consider adding wheels to the bottom to use as a desk chair. If the plans do not allow for this, wheels can be found at most any hardware store, and are fairly easy to install.
For the pro, or a beginner who does not mind taking his time, a rocking chair can be an excellent project. Spend time reviewing the plans to determine the best way to begin. Typically, the rocker pieces and the chair are built separately and attached later. The rocker takes more time as special attention has to be paid to sanding and sizing to ensure the chair rocks evenly. Given the proper attention, and with well written plans for chair, a handmade rocker can become a priceless family heirloom.
Picnic Table Plans-Building the Perfect Picnic Table for You
Many picnic plans have been ruined by the fact that there was no convenient seating. A picnic on the ground may seem romantic, but the bugs can ruin it. Do not let your picnic plans be thwarted again. When building a picnic table, the first thing to consider is materials. The simple and obvious choice of materials in this case is wood.
Plans for Bed-Building the Perfect Bed for You
Building a bed takes a steady hand, a sharp eye, and a set of extremely detailed plans. The extra care is due to the fact that building a bed is actually building a base that something else is going to have to fit into or onto later.Determine first the size of the bed to be built. Beds range in size from twin to California king.
Swing Plans- Outdoor Swings Add a Touch of Country Charm
Few things are as relaxing as lounging in an outdoor swing with a favorite beverage. In the winter they can be snuggled on under a blanket. They make an excellent napping place during a summer rain shower. Many romances are kindled in an outdoor swing. When looking for swing plans, it is important to know what you want. Consider locations as well as those who will be swinging in it.
