Air Conditioning Energy Saving Tips

Ordinarily, most people interpret air conditioning as the process of cooling a room. While this is so, the process involves a lot more. This is where the temperature of a room is regulated through heating, cooling, and ventilation. Another name for this is HVAC. History traces the first air conditioning to the ones installed in the New York Stock Exchange in 1902. These were able to heat and cool air separately.

A lot has been achieved since then. Modern air conditioners use Freon as refrigerant. It does not cause harm to humans but destroys the environment. It is one of the gases attributed to the depletion of the ozone layer. However, its use was withdrawn in 2010 though some components still utilize Freon. Air conditioning Naperville Illinois experts can give you more insight on the best components to use at home or in the office where you work.

Below is some need to know information on air conditioning and tips on saving energy.

1. The most fundamental air conditioners are those that come with an inbuilt thermostat. Temperature variations are read from a control unit located in an air box usually placed in the roof of a building. Without such controls, you would have to switch the component on and off. This is very cumbersome.

2. Air conditioning units do not add any coolness to air circulating in a room. Their work is to remove heat. They use the same principle as refrigerators. The only difference is that they do not produce very low temperatures associated with a refrigerator. Cooling substances, also known as refrigerants, take away heat from the air in your room.

3. Your home can use either a window style unit or a wall air conditioner. The former is placed in a window as this is the place where swapping of air takes place. A wall air conditioner can serve as an alternative to window air conditioners.

4. Ensure the air conditioning thermostat is well calibrated. Doing so will lead to proper control of temperature and improve the overall operation cycle.

5. The refrigerant should be properly charged. If the charge is improper, the unit’s efficiency reduces leading to high utilization of energy. This translates to high power bills.

6. Get an air conditioning Naperville Illinois technician to service your equipment on a regular basis. While this may cost you money, in the long run, it will save you a lot more. The equipment will operate optimally without breakdowns that are too costly to fix. In line with this, have all electrical motor and wiring inspected for any sign of wearing out.

7. Any moving parts should be lubricated. This will reduce increased consumption of power needed to keep them moving. Less lubrication increases their resistance to movement.